This is a set of connecting rods for a 5.9 liter Cummins diesel engine out of a Dodge pickup truck. We start by cleaning the rods and checking them for cracks. Once we determine there’s no cracks we then blast the rods to stress relieve them. We then recondition or resize the big ends. Once the big ends are sized we then press out the original tapered wrist pin bushings, inspect and deburr the small ends and then press-in some new tapered wrist pin bushings. The new bushings are then bored to within .005 in our Robbi pin boring machine and then we finish hone the bushings to size for the new wrist pins with our rod honing machine.
Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com/machine-shop Facebook.com/MotorMission