Custom Shop Services

Cast Iron Stove Handle Broken Bolt & Stud Removal With Thread Repair

This is a cast iron stove handle that was sent into us for some repair. The stove handle had a broken bolt in it so we had to machine out the broken bolt or stud. We then had to machine some new threads into the handle for a complete thread repair service. We [...]

2016-10-23T19:13:34+00:00 October 23rd, 2016|Custom Shop Services|

Vehicle Mounted Hot Water Heat Exchanger For Warm Hot Shower From Engine Coolant of Off Road 4×4 Camping Jeep Bronco Truck

This is a copper and brass heat exchanger we built at a customer's request. It is similar to the old original R&M Specialty Products vehicle mounted hot water element that is no longer available. How it works is you mount the heating element to your vehicle and plumb your vehicle engine coolant to [...]

2017-07-20T20:15:00+00:00 October 21st, 2016|Custom Shop Services|

2016 IFMAR 8th Scale Nitro Off Road World Championship Races, Trophy & Trophies Build For RC Tracks of Las Vegas

These are pictures of the 1st place trophy we built for Chris Tocco at RC Tracks of Las Vegas for the 2016 IFMAR 8th Scale Nitro Off Road World Championship race that is being held here in Las Vegas, Nv. Chris Tocco set the 1st place champions trophy on the front stretch of [...]

2016-10-07T23:26:44+00:00 October 7th, 2016|Blog, Custom Shop Services|

2016 IFMAR 8th 1/8 Scale Nitro Off Road World Championship Trophy Trophies For The Worlds RC Race

These are the trophies we built for Chris Tocco at RC Tracks of Las Vegas for the 2016 IFMAR 1/8 8th scale nitro off road world championship race held from September 30th, 2016 to October 8th, 2016. All of us RC enthusiasts have been anticipating the Worlds race. Awhile back Kyle Johnson who [...]

2017-07-20T20:15:00+00:00 October 1st, 2016|Blog, Custom Shop Services|

Kyosho TKI4 Aluminum RC Car Parts Anodized with Purple Anodizing by Motor Mission Machine & Radiator

Well, we have to have some fun too. In our spare time, which isn't very often, we enjoy building, wrenching, running, & racing our RC (Remote Control) cars and trucks. These parts are all of the aluminum parts off of one of our Kyosho TKI4 1/8 scale nitro buggies. Our colors are purple [...]

2016-08-15T03:32:51+00:00 August 14th, 2016|Custom Shop Services|

John Deere Pedal Tractor Front Axle Machined Out of Aluminum To Replace The Original Broken Plastic Axle At Motor Mission Machine and Radiator

This is a custom front axle we fabricated and machined out of a solid piece of aluminum. A customer brought in a broken plastic front axle off of a John Deere pedal tractor to see if we could make him a new one. So we used the broken plastic axle as a template [...]

2017-07-20T20:15:00+00:00 August 6th, 2016|Custom Shop Services|

Crofton Bug with Crosley Engine at Motor Mission Machine & Radiator

This is our Crofton Bug. It has a Crosley engine. These are unique looking vehicles that look somewhat similar to a Jeep. They are also referred to as a Farm-O-Road. Jimmy Ewing Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 Fax: (702) [...]

2016-07-14T04:51:21+00:00 July 13th, 2016|Custom Shop Services|

Hercules Model JXLD Water Pump Machining, Rebuild, & Restoration at Motor Mission Machine & Radiator

This is an old Hercules engine water pump that we rebuilt. We completely disassembled the water pump and had to machine and counter-bore the housing for a new style seal. We also had to machine a new shaft as well as some other internal parts and pieces of the water pump. This Hercules [...]

2016-07-05T18:15:22+00:00 July 5th, 2016|Blog, Custom Shop Services|

Radiant Universal Cast Iron Base Burner Antique Stove Repair and Restoration at Motor Mission Machine and Radiator

This is a Radiant Universal base burner cast iron antique stove that we restored. This stove came in with numerous cracks and wear. We completely disassembled the entire stove and then thermal cleaned and shotblasted each cast iron piece. We ended up with over 30 cracks that we had to weld and repair. [...]

2016-06-13T18:29:15+00:00 June 13th, 2016|Blog, Custom Shop Services|

Custom Aluminum Pulley Machining by Motor Mission Machine & Radiator

This is an aluminum pulley that we custom machined for an old Ford industrial work truck that has a 3408 Caterpillar V8 diesel engine in it. The original pulley was a two piece setup made out of steel. The original setup kept breaking the bolts and chucking the fan into the radiator causing [...]

2016-06-06T04:56:04+00:00 June 5th, 2016|Custom Shop Services|