This is a Komatsu 830E AC haul truck Mesabi style radiator we have in the shop for a complete rebuild and overhaul. It is in the process of getting all 1,292 of its tubes removed. Once all the tubes are removed we will remove the upper and lower rubber grommet seals as well. That’s a total of 2,584 rubber grommet seals. After all the rubber grommet seals are removed the radiator tanks and frame assembly will be thoroughly cleaned inside & out, checked for cracks, and any necessary repairs and welding will be done. After the radiator tanks and frame assembly are all good to go we will primer and paint them like new. After that we will hone all 2,584 holes to a smooth and shiny finish and then install 2,584 new rubber grommet seals. While this is happening the tubes will be getting cleaned, flushed, ultrasonic boiled, pressure washed, and then buffed and polished at both ends. We then re-install all the tubes before pressure testing each radiator section half for one hour at low pressure and one hour at high pressure each. Please give us a call for all your commercial and industrial radiator, cooling system, and heat exchanger needs. We are able and willing to help you with all of your cooling and heat transfer needs.
Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com/industrial-heavy-equipment/ Facebook.com/MotorMission