This post is for a set of 6.0 liter Ford diesel Powerstroke connecting rods with tapered wrist pin bushings. We have one connecting rod that is bent so we will be replacing that one. The other seven connecting rods have been blasted and reconditioned or resized on their big ends. We then pressed out the old original tapered wrist pin bushings and pressed in some new wrist pin bushings. We then side dressed the tapered small ends of the connecting rods before mounting the rods in our Robbi pin bore machine. Once mounted in the pin boring machine we bored the new wrist pin bushings within .005 of the required finish bore size for the new wrist pins. The rods are now ready to be honed to size with our Sunnen rod and bushing honing machine. For all your diesel and performance machining needs we are the place to call for your Las Vegas Machine Shop needs.
Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com/machine-shop/ Facebook.com/MotorMission