This is an older copper and brass radiator from a 60’s Ford Lincoln that came in for an overhaul, rod and repair, recore. The surge tank was brought in as well. The core of the radiator was only a standard 3-row so the customer elected to have us recore his radiator with a high efficiency 4-row core. So we unsoldered the tanks and side brackets from the original core so we could sandblast them inside and out. We then ran the headers on the new high efficiency core before soldering the inlet and outlet radiator tanks back onto the new high efficiency core along with the side brackets. We also completely boiled and cleaned the surge tank. One side of the surge tank was badly pitted so we had to make a patch and solder it in place on one side of the surge tank. We then gave them a fresh paint job. For all of your custom radiator and cooling system needs give us a call. We are a fully equipped Las Vegas radiator shop that can handle all of your copper and brass as well as aluminum radiator needs. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission