Skip to content
Here are some engine parts we got in for a high performance stroker GM LS engine we're building. This engine will be fitted with a forged crank from Texas Speed, a set of Wiseco forged pistons, and a set of AFR (Air Flow Resesrch) aluminum cylinder heads. Motor Mission Machine & Radiator 5435 Desert Point [...]
This is a Caterpillar 793F Mesabi style radiator with two copper Cupro-Braze aftercoolers that we had to do a quick turn-around repair & rebuild to. We picked it up on a Monday & had it in the shop for 3 days. We delivered it back by 3am Friday morning. Motor Mission Machine & Radiator 5435 [...]
This is a set of two stroke cylinder jugs for an Arctic Cat snowmobile. These cylinders were plated nikasil from the factory but we machined them for and installed conventional cylinder sleeves. We then bored and honed the cylinders to the new pistons. Now with conventional sleeves they will be able to take a standard [...]
This is a complete hardnose assembly off a Cat 854K rubber tire dozer, RTD. The hardnose contains the radiator, aftercoolers, hydraulic oil cooler, engine oil cooler, and AC condenser all of which we reconditioned and rebuilt. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 [...]
This is a special built custom copper & brass radiator we built. The truck has a PTO so the radiator required a crankhole in the core so the driveshaft of the power take-off can pass through it. For all your stock, custom, hard-to-cool, Industrial, Commercial, Heavy Duty & radical radiator & cooling system needs we [...]
This is a 5.9 liter 24 valve Cummins diesel cylinder head that we did a complete valve job and surface rebuilding to. We installed 24 new valve guides, did a tip & grind to the valves, machined the valve seats, performed a surface & square to the deck, lapped the valves in by hand and [...]
This is a load of radiators & coolers we repaired & rebuilt & delivered back to some of our customers. On the front of the trailer is a Cat 793D NGMR modular radiator. On the middle of the trailer is a pair of hydraulic oil coolers for a Hitachi EX5500 shovel. And on the back [...]
Here's a couple of Cat fuel tanks we picked up for rebuilding. The small tank is for a Cat 740 articulating dump truck & the larger one is for a Cat 793 haul truck. Both tanks are cracked & leaking so we will be repairing the damaged baffles inside and then straightening any dented areas [...]
This is a 400 cubic inch small block Chevy engine we're building. We peformed all the machine work to the block, crankshaft, connecting rods & cylinder heads. The crank & rotating assembly got balanced before the assembly started. This engine is outfitted with a complete and complimentary array of valvetrain parts from Comp Cam including [...]
This is a Hitachi EX5500 hydraulic shovel radiator we rebuilt. The radiator was completely disassembled, cleaned, rodded out, repaired, and reassembled with all new hardware and gaskets. After assembly we put our rebuilt radiators through a rigorous pressure test to ensure they do not leak. We then load 'em on our trucks or trailers and [...]
