adminmmmr

About adminmmmr

This author has not yet filled in any details.
So far adminmmmr has created 1895 blog entries.

Mini Cooper S N14 Turbo DOHC Cylinder Head Rebuild Valve Job

This is a Mini Cooper S turbocharged N14 engine cylinder head we rebuilt. The engine was overheated which warped the surface of the cylinder head & distorted the valve seats causing low compression. We cleaned the head all up, inspected it for cracks/leaks & performed a three angle valve job & surface. It looks like [...]

2019-01-18T01:34:42+00:00December 12th, 2018|Machine Shop|

Hitachi EX2500 Shovel Radiator Repair and Overhaul For Open Pit Mine

Here's some torch work to the headers of one of the cores off of a Hitachi EX2600 shovel radiator. The solder is being melted off the headers around all of the tube-to-header joints to get them completely clean & down to raw metal. Once they are completely clean we will re-run the headers which is [...]

2019-01-18T01:35:48+00:00December 8th, 2018|Radiator Shop|

Twenty Four Valve 6.7 Liter B-Series Cummins Diesel Cylinder Head Surface Milling

This is a twenty four valve 6.7 liter B-series Cummins diesel cylinder head that came in for a surface only. The engine was overheated and you can see how warped the head was in the picture after just a couple of passes on our AMC milling machine. The head ended up needing .020 (twenty thousandths) [...]

2018-12-05T01:06:28+00:00December 5th, 2018|Machine Shop|

Standby Generator Genset Radiator Recore With A Rocore Mechanically Bonded Core

This is a standby generator genset radiator we re-cored with a new mechanically bonded radiator core. This radiator has a hi-temp core & a lo-temp core which are both under one header tube sheet. For all your specialty cooling & heat transfer needs we are ready & able to service your needs. Motor Mission Machine [...]

2018-11-30T23:32:00+00:00November 30th, 2018|Radiator Shop|

GM Chevy Chevrolet Performance LSX Next High Performance LS Engine Machine Shop

This is a GM Performance LSX block with a billet crank we're doing some machine work to. The housing bore was out of spec so we align honed the mains in our Sunnen line hone. We put the crank in our DCM wet mag to check it for cracks before welding the thrust & grinding [...]

2018-11-30T03:11:45+00:00November 30th, 2018|Machine Shop|

Cat 789B Haul Truck Folded Core Radiator Repair and Rebuilding

This is a Cat 789B haul truck folded core style radiator that we did a complete repair & overhaul to. The radiator is on one of our flatbed delivery trucks being delivered back to our customer. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 [...]

2019-01-18T00:38:33+00:00November 28th, 2018|Radiator Shop|

Happy Thanksgiving From All Of Us At Motor Mission

All of us at Motor Mission are thankful for all of you, our customers/friends, as well as those who have & are currently serving our country. Happy Thanksgiving to you all!! Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission [...]

2018-11-22T20:56:01+00:00November 22nd, 2018|Custom Shop Services|

LS Stroker Engine With Wiseco Forged Pistons and AFR Aluminum Heads

Here are some engine parts we got in for a high performance stroker GM LS engine we're building. This engine will be fitted with a forged crank from Texas Speed, a set of Wiseco forged pistons, and a set of AFR (Air Flow Resesrch) aluminum cylinder heads. Motor Mission Machine & Radiator 5435 Desert Point [...]

2018-11-21T01:42:53+00:00November 21st, 2018|Machine Shop|

Cat 793F Mesabi Radiator and Aftercoolers Repair and Overhaul

This is a Caterpillar 793F Mesabi style radiator with two copper Cupro-Braze aftercoolers that we had to do a quick turn-around repair & rebuild to. We picked it up on a Monday & had it in the shop for 3 days. We delivered it back by 3am Friday morning. Motor Mission Machine & Radiator 5435 [...]

2018-11-17T00:42:29+00:00November 17th, 2018|Radiator Shop|

Arctic Cat Snowmobile Cylinder Jugs Sleeves Installed and Then Bored and Honed

This is a set of two stroke cylinder jugs for an Arctic Cat snowmobile. These cylinders were plated nikasil from the factory but we machined them for and installed conventional cylinder sleeves. We then bored and honed the cylinders to the new pistons. Now with conventional sleeves they will be able to take a standard [...]

2018-11-15T00:47:58+00:00November 15th, 2018|Machine Shop|
Go to Top