Skip to content
Here's some pics of a coolant water connection fitting we custom machined. The dark colored part is the original cast iron part that came in broken. Our customer asked us to machine a new one as they couldn't get the OE part fast enough. So we started with a solid block of steel and machined [...]
Here's some various pics of some of the radiator jobs we have going on in the shop. The first pic is an Autocar bolt-on crankhole radiator we re-cored for a garbage truck. The second and third pics are an aluminum aftercooler that came in full of oil due to a turbocharger failure so it's in [...]
Here's some engine goodies we received for one of the big block Chevy stroker engine builds we're working on. These parts are for a 505 cubic inch engine we're building that will be going into a 1969 Chevelle. In the pics is a Milodon aluminum timing cover, a set of World Products Merlin III cylinder [...]
This is a custom copper and brass 5-row radiator we built for a 1939 Cadillac street rod. The Caddy has a 500hp V8 Cadillac engine with air conditioning to keep the occupants motivated & cool while cruising the Strip. Since we had the room we made the radiator a 5-row and set it up with [...]
Here's a couple of Harley Davidson motorcycle cylinder heads we rebuilt. These Harley heads were brought in for a good cleaning after what looked like a major sandstorm got all up in their junk. We ended up doing a complete valve job along with milling their surfaces square and flat before reasssembling them with new [...]
Here's some pics of a bolt-on radiator out of a semi truck that came in to be overhauled with a rod and repair. The dirty black radiator is how they look when they come in. The clean gray radiator is how they look after we get done with our rod and repair rebuilding service or [...]
Here's some import engine and cylinder head machining we finished up. The four cylinder block, crankshaft, connecting rods and cylinder head are made by Toyota. We did a bore and hone to the cylinders for new oversize pistons and rings, surfaced/squared the deck of the block, did a grind & polish to the crank, reconditioned [...]
Here's some pics of a set of high performance aluminum cylinder heads we ordered in for a 555 (Triple Nickel) cubic inch big block Chevy stroker engine we're building. We special ordered the heads from AFR (Air Flow Research) as a complete assembled set for a hydraulic roller camshaft and valvetrain. The heads are fully [...]
Here's some pics of a mix of parts we rebuilt and delivered to some of our mining customers as well as some parts that we picked up. The yellow fuel tank is off of a Komatsu 830E haul truck. It came in buckled and swelled from being over pressurized during a fuel stop. There's a [...]
Here's some before and after pics of an aluminum cylinder head that came in for repair. The cylinder head is for a 450 KTM four stroke motorcycle. The valve seats were slightly pitted so we machined the intake and exhaust seats with our three angle valve seat cutters on our Tobin Arp seat-and-guide machine for [...]
