adminmmmr

About adminmmmr

This author has not yet filled in any details.
So far adminmmmr has created 1895 blog entries.

John Deere 624G Loader Radiator Rod and Repair Overhaul Rebuild

This is a John Deere 624G loader radiator that we have in for a rod and repair. This one is not only heavily fouled and plugged externally within the fins but the tubes internally are extremely dirty and plugged as well. It's no wonder the loader keeps shutting down due to overheating. This [...]

2017-06-26T02:43:24+00:00June 26th, 2017|Radiator Shop|

Big Block Chevy & FE Ford Engine Blocks For High Performance Stroker Builds

Here's some engine blocks that are all here for big inch stroker builds. The Ford engine is a brand new FE block from BBM Bear Block Motors. It's going to be built to at least 428 cubic inches. The other two blocks are big block Chevy's. One is a 454 block which will [...]

2017-06-26T00:59:18+00:00June 26th, 2017|Machine Shop|

Custom Aluminum Gas Tank Build For A Rat Rod Project

This is an aluminum gas tank we custom built for a rat rod project. Our customer brought us a cardboard template pattern for us to build the tank from. We installed a combination fuel pick-up assembly with a built-in sending unit for a fuel level gauge. The Aluminum welding was done with our [...]

2017-06-24T14:29:02+00:00June 24th, 2017|Custom Shop Services|

Autocar Crankhole Crankbox Garbage Trash Refuse Truck Radiator Repair, Overhaul, & Recore

This is an Autocar bolt-on industrial commercial radiator that came in off of a garbage trash truck. This radiator was extremely plugged and clogged externally from grease and oil that was built up on the fins. The lack of airflow across the fins caused the engine to overheat which caused excessive pressure in [...]

2017-06-19T20:35:36+00:00June 19th, 2017|Radiator Shop|

Blower Motor Engine Block Cylinder Bore & Hone & Housing Bore Machining For 4-Bolt Billet Main Caps, Line Bore, & Align Honing

This is a 350 Chevy small block V8 engine block that is going to be built as a blower motor. We first thermal cleaned and shotblasted the block before magnafluxing it for cracks. It was a 2-bolt main block so we machined it for some 4-bolt billet main caps. After the new four [...]

2017-06-19T04:39:17+00:00June 19th, 2017|Machine Shop|

Diesel Pusher RV Motorhome Radiator Recore Due To Corrosion

Here's some before and after pictures of a radiator for a diesel pusher RV motorhome. The original core was severely corroded from salt exposure to the point that the fins were literally disintegrating. We cleaned the frame and bracket assembly and fixed it all up with a new high efficiency core. Motor Mission [...]

2017-07-20T21:04:33+00:00June 16th, 2017|Radiator Shop|

International Water Pump Restoration & Rebuilding

This is a 1967 International water pump that came in to be rebuilt because a replacement couldn't be found. We disassembled the water pump and shotblasted the housing. We then had to machine the inside of the housing for a newer style seal. We also made a new shaft for it as the [...]

2017-06-19T04:42:12+00:00June 16th, 2017|Custom Shop Services|

1969 Chevrolet Camaro Custom High Efficiency Radiator With Electric Fans

This is a custom high efficiency 4-row copper and brass radiator we built for a 1969 Chevrolet Camaro. Along with the radiator we custom built the aluminum shroud to house two high performance Spal electric fans. For all your cooling system needs and custom radiators for hard-to-cool vehicles please give us a call [...]

2017-06-16T02:13:32+00:00June 16th, 2017|Radiator Shop|

Las Vegas Engine Rebuilding Machine Shop

Here's some pics of a big block Chevy engine block in our Sunnen CK10 cylinder hone. Our customer was hoping his cylinders would clean up by just honing the cylinders so he could get away with a simple re-ring job. Unfortunately the cylinders still have some heavy shadows which indicate worn areas in [...]

2017-06-26T02:52:24+00:00June 16th, 2017|Machine Shop|
Go to Top