Skip to content
Here’s some pics of a Caterpillar 793C haul truck radiator we overhauled. The delivery back to our customer was a slow go on the roads with the weather but we got it there. 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission
Here’s some pics of a custom water pump pulley we machined out of a solid round piece of aluminum. The larger pulley was shipped to us to use as a pattern for machining the smaller diameter pulley. We made the new water pump pulley as small as possible in order to clear the housing of [...]
Here’s some pics of a Caterpillar 785 water truck folded core radiator we picked up, cleaned, repaired, pressure tested, painted & delivered back to our customer. We picked the radiator up from our customer at 11am one day & got it delivered back to them by 8:30pm the next day. 5435 Desert Point Dr. Las [...]
Here’s a couple of Caterpillar haul truck radiators we're overhauling. The larger radiator is a 793D Mesabi & the smaller one is a 793C folded core radiator. Up next for both radiators is pressure testing & then final detailing & delivery back to our customers. 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) [...]
Here’s some pics of a set of Caterpillar 16M Grader Axle lean arms 2641150 & 2641153 on our Rottler CNC machine. These lean arms came in on an axle assembly that was worn to the extreme. Both lean arms were completely worn on all surfaces & bores. To get the lean arms back to spec [...]
Here’s some before & after pics of a John Deere 4220 tractor radiator & oil cooler assembly. We removed the top & bottom tanks on the radiator & gave it a complete rod & repair. The oil cooler was cleaned, flushed & pressure tested. Both the radiator & oil cooler are now clean inside & [...]
Here’s some before & after pics of an older cast iron water pump off of a Hercules model JXLD engine that was shipped to us for repairing & rebuilding. We completely disassembled the pump & performed all necessary machining to the cast iron housing, the shaft & seal areas. We also custom machine any of [...]
Here’s some pics of a Caterpillar 793D haul truck radiator we overhauled. This radiator is a Mesabi type. Each individual Mesabi tube was removed & reconditioned. All the rubber grommet seals were removed & all the holes were cleaned & inspected before new rubber grommet seals were installed. After all the individual Mesabi tubes were [...]
Here’s some pics of a Caterpillar 793D haul truck Mesabi Radiator module we're in the process of rebuilding. The tanks & side frames assembly have been cleaned, prepped & painted. The bores were then wire brushed clean, checked for any wear & size before the new rubber grommet seals were installed. The next step is [...]
Here’s some pics of a Caterpillar Grader Axle on our Rottler Multipurpose CNC boring & milling machine. The surfaces on each side of the center support bore were badly worn so we welded them up & then machined them flat, square & back to the correct thickness spec. The surfaces that retain the lean arms [...]
