RV Diesel Pusher Motorhome Radiator & Air Intercooler Dirty with Oily Dirt For Cleaning, Repair, & Pressure Test at Motor Mission Machine & Radiator
This is a filthy dirty radiator that came in off of an Allegro Phaeton RV with a diesel pusher engine in it. The motorhome was severely overheating on the last camping RV road [...]
John Deere Pedal Tractor Front Axle Machined Out of Aluminum To Replace The Original Broken Plastic Axle At Motor Mission Machine and Radiator
This is a custom front axle we fabricated and machined out of a solid piece of aluminum. A customer brought in a broken plastic front axle off of a John Deere pedal tractor [...]
Atlas Copco Pit Viper 351 Drill Rig Mechanically Bonded Radiator & Caterpillar 793C Folded Core Style Spare Radiator All Rebuilt, Overhauled, & Ready To Go at Motor Mission Machine & Radiator
Here's a couple of large mining equipment radiators for some large cooling modules. The orange radiator is a spare radiator for an Atlas Copco Pit Viper 351 Drill Rig. This radiator is comprised [...]
LeTourneau L1850 Loader Mesabi Style Radiator & Oil Cooler Rebuild & Overhaul at Motor Mission Machine & Radiator in Las Vegas, Nv. For an Open Pit Mine
This is a LeTourneau L1850 loader radiator we rebuilt for one of our large open pit mine customers. This radiator is a Mesabi style radiator that has nearly 1,600 individual L&M Mesabi style [...]
Caterpillar 938G loader bore repair by welding, boring, & sleeving with our portable line bore boring bar at Motor Mission Machine & Radiator
This is a Caterpillar 938G loader that we're repairing the pin bores on. The bores are worn out and distorted so we setup our portable line bore boring bar to it so we [...]
1 piece rear main seal SBC small block Chevy Roller Block 350 Engine Machine Work & Shortblock Assembly at Motor Mission Machine & Radiator
This is a late model Chevy 350 that has a one piece rear main seal. The block is also set up for a roller cam and lifters so it is referred to as [...]
Caterpillar 938G loader bucket pin holes repaired by welding, boring, & sleeves with our portable line bore at Motor Mission Machine & Radiator
This is a Caterpillar 938G loader bucket that we are boring the pin holes of with our portable line bore boring bar machine. The holes that the pins go in are worn and [...]
Hitachi EX5500 shovel hydraulic oil coolers overheating and picked up by Motor Mission Machine & Radiator for rebuild and overhaul with the engine & a 16G Grader Front Axle in the background
This is a recent run we made to one of our mining customers up in northern Nevada. We picked up these two hydraulic oil coolers which are off of a Hitachi EX5500 shovel. [...]
Hercules White 3.7 Liter 4 Cylinder Diesel Engine Machine Work & Engine Rebuild at Motor Mission Machine & Radiator
This is a Hercules White four cylinder diesel engine that came in for a complete engine rebuild. We completely disassembled the engine, thermal cleaned, blasted, magnafluxed, pressure tested, measured, inspected, bored, honed, surfaced, [...]
Caterpillar 3406B Cylinder Head That Came In To Be Magnafluxed For Cracks as well as a Pressure Test, Inspection, Valve Job, & Surface at Motor Mission Machine & Radiator
This is a Caterpillar 3406B cylinder head that came in for a clean, magnaflux for cracks, pressure test for leaks and cracks, inspection, valve job, and surface. If you need any machine work, [...]
Custom Radiator With Fan Shroud & 2 High Performance Electric Fans Built For The International Truck Named Ditch Digger Built By Steve Darnell of Welderup Welder Up & His TV Show Vegas Rat Rods Built By Motor Mission Machine & Radiator
This is the custom and special built high efficiency copper and brass radiator and fan shroud with two high performance electric fans we built for the International truck called Ditch Digger for Steve [...]
Custom Radiator With Fan Shroud For Electric Fan Built By Motor Mission Machine & Radiator For Steve Darnell Of WelderUp Welder Up And His Show Vegas Rat Rods On The Discovery Channel
This is a custom high efficiency copper and brass 4-row radiator with an aluminum fan shroud to house a high performance electric fan that we built for Steve Darnell of WelderUp / Welder [...]











