Skip to content
Yamaha Banshee Two Stroke Cylinder Jugs Boring and Honing For New ProX Pistons
This is a set of two stroke cylinder jugs for a Yamaha Banshee. They came in with some scratches & scoring in the bores. We rough bored them to see what size they would clean-up [...]
AC Condenser Repairing With Propane Torch and Silver Solder Welding
This is an air conditioning condenser that we are repairing some damaged tubes on. It came in leaking so we cleaned it up & pressure tested it to locate the leaks. The mounting plate had [...]
Chevy Duramax Diesel Engine Billet Main Caps and Stud Girdle Line Boring
This is a Duramax diesel engine out of a Chevy Silverado 3500hd truck. The crankshaft cracked at the number one rod journal & the number two main journal. This caused the number two main housing [...]
Caterpillar 793C Folded Core Radiator Repairing and Rebuilding
This is a Caterpillar 793C haul truck radiator we did a complete repair & rebuild to. This particular radiator has sixty individual folded radiator cores & each one gets a rod & repair before being [...]
Chevy Truck Small Block V8 Engine Machining and Rebuilding
This is a small block Chevy V8 engine we're finishing up the rebuild to. The engine was disassembled, cleaned, checked & measured. We performed all the machine work to the block, crank, connecting rods & [...]
Komatsu 830E Mesabi L&M Radiator Picked Up For Rebuilding
This is a Komatsu 830E haul truck Mesabi radiator we picked up for rebuilding. All the tubes will get removed to be ultrasonic cleaned & reconditioned before being installed back into the tanks with all [...]
6.6 Liter Duramax Diesel Engine Block Line Boring With Wagler Billet Main Caps On Rottler EM105H CNC Machine
This is a 2007 Chevy 6.6 liter Duramax LBZ diesel engine block getting the housing bore line bored on our Rottler EM105H CNC machine. The block is fitted with a set of Wagler billet main [...]
Dirty, Plugged, Clogged, Damaged and Leaking Radiators for Repairing
Here's some smaller passenger car & truck size radiators we have in for rod & repair & more than likely some recoring. These radiators are damaged, dirty & internally plugged & clogged down in the [...]
Caterpillar 789B Haul Truck Folded Core Radiator Rebuild
This is a Caterpillar 789B haul truck folded core radiator we did a complete overhaul to. We delivered it back to our customer along with a Ford F750 air suspension drivers seat that we repaired [...]
Chevy GM Isuzu Duramax Diesel Crankshaft Crack Failure
This is a 6.6 liter Duramax diesel V8 steel crankshaft. The engine developed a knock that kept getting louder. After the engine was disassembled we found the number two main housing bore is a bit [...]
Caterpillar 793C Radiator Pressure Testing and Rebuilding
Here's a Caterpillar 793C mining haul truck folded core radiator. In the one pic it is in our test tank getting pressure tested. After the pressure test is completed the radiator gets a final cleaning, [...]
Caterpillar Rubber Tire Dozer Trunnion Support Welding and CNC Machining Repair
This is a Caterpillar trunnion support for an 854G RTD (Rubber Tire Dozer). The mounting pads of the trunnion support were worn & damaged which required welding the worn areas up. Here the trunnion support [...]