Skip to content
Here's some before and after pics of a 1925 Dodge Brothers water pump that came in for repair and rebuilding. The customer thought it was just a Chrysler or Plymouth but typically anything Dodge related prior to 1930 is considered to be or classified as a Dodge Brothers. The pump was pretty rusted and pitted [...]
Here's a custom piece we did some machining and fabricating to. The aluminum base plate was brought to us so we could countersink the bolt holes for the panhead allen head bolts. We then cut, fabricated, tig welded, and machined the velocity stacks which are four inches long. We also had to fab and machine the [...]
This is a 1969 Ford Mustang Mach1 429 V8 water pump. Our customer purchased a new water pump but it is longer than the original pump and would not line up correctly. He couldn't find another pump exactly like his original one so he brought it in so we could rebuild it for him. We [...]
Here's some pics of a custom drain plug we machined for an ATV quad fourwheeler. Someone tried repairing the drain plug threads in the engine by installing a Time-Sert thread repair insert into the engine but it did not seal and continued to leak. So we removed the Time-Sert and made a new drain plug [...]
Here's some custom parts we machined out of aluminum. The smaller piece is the one that was brought to us to use as a pattern to make the larger ones. The two new parts needed to be taller, or thicker, than the original and they also needed to be slightly smaller on the ID. For [...]
This is a custom aluminim double V-Groove water pump pulley we machined out of a solid piece of billet. This is for a blown big block Chevy engine which requires more coolant flow. A pulley combination of the available sizes off the shelf couldn't be found that would provide the increased water pump RPM needed [...]
Here's some pics of some custom machine work we've done. The first pic is some hardend dog bone bushings we make for the haul trucks at the mines. The second pic is some hardened splined shafts we duplicated for a customer. The third pic is a high performance forged piston we're fly cutting with our [...]
Here's some pics of our front counter area and small display of antiques. The smaller stove on the far left is an Oak Garland stove that we restored while the two on the right are Round Oak cast iron stoves. The finials on the Round Oak stoves we had copper coated to set them off [...]
Here's some pics of a coolant water connection fitting we custom machined. The dark colored part is the original cast iron part that came in broken. Our customer asked us to machine a new one as they couldn't get the OE part fast enough. So we started with a solid block of steel and machined [...]
This is an aluminum gas tank we custom built for a rat rod project. Our customer brought us a cardboard template pattern for us to build the tank from. We installed a combination fuel pick-up assembly with a built-in sending unit for a fuel level gauge. The Aluminum welding was done with our [...]
