Skip to content
Here's an older copper and brass radiator out of a 1957 Cadillac. We're also rebuilding the engine for this restoration project. The core was shot so we recored it with a new core. Our customer is doing a complete restoration to this Caddy and we're very happy he chose us to bring his [...]
This is an aluminum hydraulic oil cooler with an electric fan off of a Caterpillar 994F loader. This oil cooler came in completely dirty and covered in greasy dirt and mud due to an oil leak. So we pressure washed it, then boiled it clean in our hot tank vat and ultrasonic cleaning [...]
This is a Vermeer T955 crawler trencher radiator and oil cooler combination heat exchanger cooling unit. We recored the radiator with a new radiator core and completely flushed and overhauled the oil cooler. We had to do extensive welding and bolt hole repairs to the oil cooler as it was completely shook apart [...]
This is a Vermeer T955 crawler trencher radiator and oil cooler assembly that came in for a complete rebuild and overhaul. The radiator is leaking at the bottom header due to a crack. The oil cooler has been dangling and flopping around as most of the bolts are sheared and broken. This thing [...]
These are some Caterpillar modular radiator cores and sections that we picked up from one of our customers. The modular radiator cores are off of an IT18 wheel loader. The radiator cores and sections came in to be cleaned inside and out so we will be pressure washing them first before we give [...]
This is a radiator & CAC (charge-air-cooler) unit out of an International DT466E. It came in becuase the radiator was leaking so we did a rod & repair to the radiator & pressure tested the CAC. The CAC had some small leaks on the inlet side as well so we sealed both headers [...]
This is a 175 International crawler tractor radiator after we got it all rebuilt. The top tank is a bolt-on while the bottom tank is a solder-on. We removed both tanks so we could rod out the tubes of the core & then boil it out in our ultrasonic. This radiator was a [...]
This is a copper & brass radiator for a 1957 Cadillac that we're rebuilding the engine for as well. This radiator has been repaired in the past and it is heavily corroded internally so we are going to recore the radiator with a new core. This is the original radiator as it still [...]
Here's a couple of large mining equipment radiators we rebuilt & delivered to our mining customers in northern Nevada. The yellow radiator is a Caterpillar 793C haul truck folded core style radiator & the orange radiator is off of an Atlas Copco Pit Viper 351 drill rig. The Pit Viper radiator is a [...]
This is a copper & brass radiator for a Ford truck. We removed the top & bottom tanks, rodded each tube / core to clear out any internal blockaged, & boiled out the radiator. We then soldered it all back together & pressure tested it for leaks. Our customer wanted the core painted [...]
