This is a picture of a radiator on the radiator lift being repaired. This is what we call running the header which involves melting all of the old solder off of the header plate around every tube. Once all the old solder is removed and every tube is clean & shiny we then run (melt) new solder around every tube along the entire header plate which provides a new seal at the tube-to-header joints. This is a very delicate procedure as the tubes can be easily damaged if too much heat is applied.
Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com/radiator-shop Facebook.com/MotorMission