adminmmmr

About adminmmmr

This author has not yet filled in any details.
So far adminmmmr has created 1846 blog entries.

Komatsu 830E Mesabi Radiator & Caterpillar 793D Radiator Repair and Overhaul

Here's a couple radiators we delivered & picked up. The larger radiator is a Komatsu 830E Mesabi radiator with just under 1500 individual tubes we overhauled & delivered back to our customer. On the trip home we were fortunate to pick-up a Caterpillar 793D modular radiator for repair & overhaul. Motor Mission Machine & Radiator [...]

2019-10-04T13:42:19+00:00October 4th, 2019|Radiator Shop|

5.9 Liter B-Series Cummins Diesel Engine Block and Crankshaft Machining

Here's a 5.9 liter B-Series Cummins diesel engine block & crankshaft we machined. After cleaning, checking for cracks & inspecting we bored & honed the cylinders for oversize pistons & rings. Along with the boring, we surfaced & squared the deck on our Rottler EM105H. The crankshaft was wet magnafluxed and then got a polish [...]

2019-10-03T23:11:11+00:00October 3rd, 2019|Machine Shop|

Hitachi EX5600-6 Mining Shovel Radiator Recore Rebuilding

This is a Hitachi EX5600-6 mining shovel radiator we overhauled with new high efficiency heavy duty radiator cores. There are eight separate cores in this radiator. Four in the low temp radiator & four in the high temp radiator. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 [...]

2019-10-02T21:24:00+00:00October 2nd, 2019|Radiator Shop|

Case Iveco Cylinder Head Machining On Rottler EM105H Heavy Duty Multi Purpose CNC Machining Center

This is an Iveco cylinder head off of a Case Magnum 340. This engine is also called a Cursor, Fiat, & FPT. It's very similar to a Cat 3406E/C15 cylinder head but slightly wider in width. We did a complete valve job & milled the surface on our Rottler EM105H multi purpose CNC machining center [...]

2019-10-01T23:47:35+00:00October 1st, 2019|Machine Shop|

Komatsu 830E Mesabi Radiator and Cat 773 Haul Truck Conventional Radiator Building

Here's a couple of radiators we're finishing up for the mines. The larger one is a Komatsu 830E haul truck Mesabi radiator. The smaller one is for a Cat 773 lube truck. As soon as we get them pressure tested & detailed they'll be ready for delivery. There's a couple stacks of Cat folded radiator [...]

2019-09-30T23:26:30+00:00September 30th, 2019|Radiator Shop|

Old Ford and White Tractor Copper and Brass Radiator Repair and Rod Out

Here's some before & after pics of a couple of all metal copper & brass tractor radiators we did a rod & repair to. The smaller radiator is for a 56-10 Ford tractor & the larger radiator is for a 2-135 White tractor. We removed the top & bottom tanks, ultrasonic cleaned the cores, blasted [...]

2019-09-28T15:32:10+00:00September 28th, 2019|Radiator Shop|

5.9 Cummins Diesel Block Surfacing and Machining On Rottler EM105H Heavy Duty Multi Purpose CNC Machining Center

This is a 5.9 liter B Series Cummins diesel engine block on our Rottler EM105H heavy duty multi purpose CNC machining center. The Rottler EM100 series machine automatically probes the deck of the block as well as the cylinders for unattended cylinder boring & deck surfacing. This is the third 5.9 Cummins block we have [...]

2019-09-27T17:56:59+00:00September 27th, 2019|Machine Shop|

793C Caterpillar Mining and Construction Radiator Service

Another Cat mining 793C haul truck radiator ready to go. Each of the folded radiator cores were disassembled, ultrasonic boiled, rodded out, reassembled & pressure tested before the entire radiator was assembled & pressure tested as a complete unit. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 [...]

2019-09-26T16:47:09+00:00September 26th, 2019|Radiator Shop|

Heavy Equipment Mining and Construction Lincoln Grease Pump Repair and Rebuilding

This is a Lincoln grease pump we did a complete repair & rebuild overhaul to. We completely disassembled the pump, cleaned & inspected all the parts & machined some new parts for it as well. We then assembled it with all new gaskets & seals. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las [...]

2019-09-25T13:51:08+00:00September 25th, 2019|Industrial & Heavy Equipment|

Cat D11R Dozer Mesabi L and M Radiator Repair, Pressure Test and Rebuild

This is a Mesabi style radiator out of a Caterpillar D11R dozer. This is a newer style radiator which is part of the cooling system package for the newer Tier 4 diesel engines that are being used in some of the mining & construction machines. We did a complete repair & overhaul to this radiator [...]

2019-09-24T00:52:43+00:00September 24th, 2019|Radiator Shop|
Go to Top