Skip to content
Here's a Cat 793D haul truck radiator we overhauled for one of our mine customers. We actually exchanged the NGMR modular style radiator we picked up & delivered a Mesabi style radiator as they are interchangeable. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 [...]
Here's some random machine work we're doing to some MG, Oldsmobile, Buick, Chevy & Hemi engine parts in the machine shop. The MG cylinder head is getting a three angle valve job & surface. The engine blocks are getting a bore & hone to the cylinders, a surface & square to the decks and the [...]
Here's a 1932 Ford coupe radiator that came in for a rod & repair. It had a shroud on it with a ten inch electric fan. We ended up building the new aluminum fan shroud for it & fitting it with a sixteen inch high performance electric fan. Motor Mission Machine & Radiator 5435 Desert [...]
Here's some oscillating loader axle Trunnions & Supports we recently finished repairing & reconditioning. These Trunnions & Supports are for a Komatsu WA1200 loader. The bores all had to be machined, welded & then bored back to spec. The mounting surface pads also required welding & surfacing. The oring seal grooves and counterbores all required [...]
Here's a load of Caterpillar modular radiator cores that we refer to as sections. These cores are for a loader but they are used in rubber tire dozers (RTD) as well as lots of other types of machines. They come in all dirty externally & plugged or corroded internally. We have them all rebuilt & [...]
Here's a couple of Caterpillar dozer equalizer bars we reconditioned. The bores were worn & needed to be welded & then bored back to the proper size. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission
Here's a Caterpillar haul truck radiator we picked up from one of the mines for repair & rebuilding. The Triple Seven is a folded core style radiator. It is very similar to the other Cat radiators we work on but just a bit smaller. Each folded radiator core will get a rod & repair during [...]
This is our new Rottler EM105H multipurpose CNC machining center. It is based off of an F105. We have a front & rear trunnion on it for a Komatsu WA1200 loader. The trunnions require bore welding & machining as well as surfacing of their mounting pads. The engine block is a 5.9 Cummins diesel that [...]
Here's a delivery we made to some of our mine customers. The orange radiator is a Mesabi style for a Hitachi EX5500 shovel. The fuel tank is for a Cat 793C haul truck. In the middle of the trailer is a Cat 793 haul truck bellcrank Y-link & a Toro lawnmower. We did a complete [...]
This is a Berkeley pump that came in for rebuilding. It had rocks lodged inside of it to the point it was locked up & wouldn't spin. It pumps slurry which contains water, mud & heavy debris. We reconditioned it back to new & ready for another service life. Motor Mission Machine & Radiator 5435 [...]
