adminmmmr

About adminmmmr

This author has not yet filled in any details.
So far adminmmmr has created 1849 blog entries.

Caterpillar Bucyrus 6060FS Hydraulic Shovel Aluminum Radiator Repair, Recore, and Replacement

This is an all aluminum radiator for a Caterpillar 6060FS hydraulic mining shovel. The original radiator core had several cracked tubes so we replaced it with a new heavy duty replacement. Some might recognize it as a Bucyrus because Caterpillar took over their line of shovels. Motor Mission Machine & Radiator 5435 Desert Point Dr. [...]

2018-03-28T03:59:21+00:00March 28th, 2018|Industrial & Heavy Equipment|

3116 Caterpillar Cylinder Head Valve Job and Surface Rebuild

Here's some pics of a 3116 Caterpillar inline six cylinder diesel cylinder head. Our customer brought the cylinder head in for repair as it was leakig fuel into the oil. During the magnaflux and pressure test we found a couple of cracks that were leaking. For this particular job it was quicker to exchange the [...]

2018-03-27T13:02:36+00:00March 27th, 2018|Machine Shop|

Caterpillar Dynalift Extendaboom Telescoping Forklift Radiator Repair and Overhaul

Here's some before and after pics of an all metal radiator that came in leaking for a rod and repair. The radiator is out of a diesel powered Dynalift telescoping forklift. We removed both the inlet and outlet tanks so we could rod out all the tubes and the leaks were taken care of when [...]

2018-03-26T19:09:54+00:00March 26th, 2018|Radiator Shop|

Welding, Fabrication, Repair, Machining and Rebuilding Projects For Various Parts

Got welding? Here's some pics of sparks flying from one of our welders. We do a lot of welding and fabrication along with machining to various projects and parts we get in for repair and rebuilding. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 [...]

2018-03-24T16:13:52+00:00March 24th, 2018|Machine Shop|

Commercial Industrial Forklift Radiator Rebuild and Repair

Here's some before and after pics of an industrial radiator off of a forklift that came in for a rod and repair. We removed both the inlet and outlet tanks, rodded out all the tubes, ran both headers, soldered it all back together and pressure tested it to make sure it has no leaks. Motor [...]

2018-03-09T20:35:26+00:00March 9th, 2018|Radiator Shop|

Suzuki Samurai, Jeep Cherokee, Mini Cooper, and Chevy Gen1 and LS Engine Machining

Here's some pics of random engines we're doing machine work and rebuilds to right now. The aluminum four cylinder block is for a Suzuki Samurai which we are shortblocking. The cast iron four cylinder block is for a Jeep Cherokee which we are rebuilding complete with a brand new cylinder head. The other smaller cast [...]

2018-03-09T20:09:24+00:00March 9th, 2018|Machine Shop|

Caterpillar 793D Haul Truck Mesabi Radiator Service and Delivery

Here's some pics of one of our spare swing Caterpillar 793D Mesabi radiators. This radiator has been sitting on our floor in our stock all rebuilt and ready to go. One of our mining customers had an unscheduled high hour radiator that developed a leak so we loaded this one up and delivered it to [...]

2018-03-08T06:43:48+00:00March 8th, 2018|Radiator Shop|

High Performance Ford Mustang V8 Engine

Here's some pics of a high performance small block Ford V8 engine we're building for an older Mustang. All the machine work is done and it is on the engine stand waiting for the assembly process to begin. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or [...]

2018-03-07T06:39:13+00:00March 7th, 2018|Machine Shop|

Clogged and Plugged Radiator Core Tubes From Bad Antifreeze and Broken Down Coolant

Here's some pics of the inside of a radiator after the tanks, or what most people call end caps, have been removed. As you can see, the tubes, which many people refer to as cores, are corroded and plugged internally which has greatly reduced their capabilty to flow any coolant and eliminated any heat rejection [...]

2018-03-06T06:18:57+00:00March 6th, 2018|Radiator Shop|

Cylinder Head Surface Finish, Valve Recession, and Bronze Injector Sleeves

Here's some closeup shots of the surfaces of some cylinder heads after we've machined them. The first two pics are of a diesel cylinder head which depicts the proper surface finish of the deck of the head, the proper valve recessions being set, and the new bronze injector sleeves can be seen as well. The [...]

2018-03-06T05:49:09+00:00March 6th, 2018|Machine Shop|
Go to Top