Skip to content
Here’s some pics of a gas tank we built, or fabricated, to replace the original tank which was rotten & full of holes. We bent & fabricated a new gas tank & then removed all the cast fittings from the old original tank & attached them to the new tank with rivets We then soldered [...]
Here’s some pics of a couple jobs we picked up while out on a road trip. On the back of the flatbed is a Caterpillar 777G modular radiator that has lived in a corrosive environment & needs some TLC. On the front of the flatbed is an aluminum bar-and-plate compressor oil cooler that is leaking [...]
Here’s some before & after pics of an old, maybe antique or vintage, Continental engine water pump off of a forklift. Our customer thought it was an old Hyster forklift. He sent the pump to a couple of other places to have it repaired only to be told that it was not repairable. He did [...]
Here’s some before & after pics of a Caterpillar standby generator radiator we did a rod & repair to. The inside of this radiator was heavily rusted & corroded as many genset radiators are from mostly sitting without running. It also had some leaks. We completely disassembled it & cleaned the tubes & headers of [...]
Here’s some pics of a Caterpillar 793C mining haul truck radiator we're finishing up rebuilding. All sixty of the individual folded radiator cores, or sections, have each received a rod and repair as well as individually pressure tested. The radiator is now completely assembled & getting pressure tested as a complete assembly. 5435 Desert Point [...]
Here's some pics of the parts of a Caterpillar 16M grader axle we're rebuilding. The ends of the main axle frame are worn where the lean arms are installed. The inner faces are welded up & then the inner faces are machined to provide a tight & solid mounting of the lean arms at each [...]
Here’s some pics of an industrial bolt-on radiator we did up for a garbage truck. The hole in the radiator core is called a crankhole, or crankbox, for the PTO (power take-off) driveshaft to pass through. 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission [...]
Here’s some pics of an AMC cast iron V8 engine block we have in to get its cylinders machined for a set of new oversize pistons. We first mounted the block on our Rottler boring bar so we could rough bore the cylinders for a set of new thirty over (.030) pistons. After we finished [...]
Here’s some pics of a JCB 8042 Forklift radiator we overhauled. The radiator is an all metal unit with a copper & brass core, brass inlet (top) & outlet (bottom) tanks & steel side braces. The core has six rows of staggered tubes. After disassembling the radiator we boiled the core in our ultrasonic & [...]
Here’s some pics of a cuprobrazed aftercooler for a 3412 Caterpillar engine. These aftercoolers typically come in for cleaning & pressure testing during engine rebuilds. We machine our own test plugs for pressure testing these types of coolers so we can test them not only at low pressure but very high pressures as well. 5435 [...]
