Skip to content
Here's a load of radiators and parts we rebuilt loaded on our trailer that we delivered to our mining customers in Northern Nevada. On the front passengers side of the trailer is a Caterpillar 793C folded core radiator, on the front drivers side is a Caterpillar 785 folded core radiator, then a Caterpillar 793C fuel [...]
This is a 1947 Allis Chalmers antique tractor cylinder head that came in for a valve job & surface. Both the intake and exhaust valve seats were heavily pitted and eroded so we machined all eight seats for hardened seat inserts. We then machined the new hardened seats with our three angle seat cutters for [...]
Here's some pics of another Caterpillar 793C haul truck folded core radiator we've rebuilt and overhauled. The 793C radiator has 60 individual folded radiator cores. Sixty in the lower half and sixty in the upper half. There's a couple pics of the lower half in place with the center tank ready for the upper half [...]
Here's a pallet full of four small block Chevy engine blocks that came in from one of our customers. We will be removing all the cam bearings, galley plugs, & freeze plugs and then the blocks will be going into our Bayco Guspro thermal cleaning oven to get everything baked to dust inside and out. [...]
Here's some pics of some more parts we picked up from some of our mine customers. The larger radiator is a Caterpillar 793C folded core unit. The small fuel tank is a Caterpillar 777C. And on the back of the trailer are some class 8 semi tractor truck bolt-on or bolt together radiators. Motor Mission [...]
Here's some pics of a small block Chevy 350 engine block. This custom engine build is getting a new Eagle crankshaft with a quarter inch more stroke which will make the engine yield 383 cubic inches. This is what is referred to as a 383 stroker engine. In these pics we have honed the housing [...]
Here's some pics of a load of work we picked up from some of our mining customers. The big yellow radiator is a Caterpillar 793D NGMR radiator and the smaller black radiator is a Caterpillar 785. We also picked up a Chicago Pneumatic air compressor that needs to be rebuilt as well. We also have [...]
This is a 454 big block Chevy engine that we did a complete machining job to. The block has four bolt mains which we fitted with a set of ARP main studs before align honing the housing bore in our Sunnen line hone machine. We then performed a bore to the cylinders with our Rottler [...]
This is a custom crossflow copper and brass radiator we built. We built this radiator with a high efficiency four row core. We also custom fabricated the aluminim fan shroud. We then mounted two high performance Spal electric fans to the shroud and radiator assembly. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las [...]
Here's some pics of an aluminum oil cooler that came in for repair. Externally it was filthy dirty from oil and dirt build up so we had to get it cleaned up in order to get a good pressure test on it. Once we were able to locate the leaks we prepped it for tig [...]
