Skip to content
This is a load we picked up from one of our mining customers. The small radiator is a Caterpillar 16G grader folded core style unit. The orange radiator as well as all four of the hydraulic oil coolers are off of a Hitachi EX5500 shovel. They're all coming in for complete overhaul rebuilding [...]
This is a Detroit Diesel DDC DD15 crankshaft that came in for grinding and polishing. The engine overheated and they ran it out of coolant which took out all the rod and main bearings. We'll wet magnaflux it for cracks, check it for hardness and straightness, then grind and polish it. We'll be [...]
This is a Komatsu WA1200 loader radiator and oil cooler assembly we picked up from one of our mining customers for a complete overhaul rebuild. The front section is all radiator and the back section is all oil cooler. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: [...]
This is a couple of inline six cylinder diesel cylinder heads that we rebuilt. The gray cylinder head is a Cummins diesel 5.9 liter 12-valve engine. The yellow cylinder head is a C15 Caterpillar L6 engine. We disassembled both heads and thermal cleaned them in our Bayco cleaning oven. We then blasted them [...]
This is a John Deere 624G loader radiator that we have in for a rod and repair. This one is not only heavily fouled and plugged externally within the fins but the tubes internally are extremely dirty and plugged as well. It's no wonder the loader keeps shutting down due to overheating. This [...]
Here's some engine blocks that are all here for big inch stroker builds. The Ford engine is a brand new FE block from BBM Bear Block Motors. It's going to be built to at least 428 cubic inches. The other two blocks are big block Chevy's. One is a 454 block which will [...]
This is an aluminum gas tank we custom built for a rat rod project. Our customer brought us a cardboard template pattern for us to build the tank from. We installed a combination fuel pick-up assembly with a built-in sending unit for a fuel level gauge. The Aluminum welding was done with our [...]
This is an Autocar bolt-on industrial commercial radiator that came in off of a garbage trash truck. This radiator was extremely plugged and clogged externally from grease and oil that was built up on the fins. The lack of airflow across the fins caused the engine to overheat which caused excessive pressure in [...]
This is a 350 Chevy small block V8 engine block that is going to be built as a blower motor. We first thermal cleaned and shotblasted the block before magnafluxing it for cracks. It was a 2-bolt main block so we machined it for some 4-bolt billet main caps. After the new four [...]
Here's some before and after pictures of a radiator for a diesel pusher RV motorhome. The original core was severely corroded from salt exposure to the point that the fins were literally disintegrating. We cleaned the frame and bracket assembly and fixed it all up with a new high efficiency core. Motor Mission [...]
