adminmmmr

About adminmmmr

This author has not yet filled in any details.
So far adminmmmr has created 1895 blog entries.

Shell and Tube Bundle Style Oil Coolers For A Large Crane Repair and Bundle Replacement

These are a couple of shell-and-tube style oil coolers for a couple of cranes. When these coolers came in they had brass bundle center sections which were made by Young. The original mid-sections were leaking and no longer available so we ordered some new bundle center sections which were slightly off with their bolt patterns [...]

2017-07-22T19:32:49+00:00July 22nd, 2017|Industrial & Heavy Equipment|

1957 Cadillac 365 V8 Engine Rebuild and Restoration

This is a 1957 Cadillac engine that we did a complete machining and rebuild to. The engine is a 365 cubic inch V8. The Caddy had been sitting for over 30 years so the engine was brought to us so we could completely go through it from top to bottom. Once we got the engine [...]

2017-07-22T06:44:28+00:00July 22nd, 2017|Machine Shop|

Atlas Copco, Hitachi, Caterpillar, and Komatsu Mining Equipment Radiators, Oil Coolers, Aftercoolers, and Fuel Tank Overhauling and Rebuilding

Here's some pics of some radiators, oil coolers, aftercoolers, and fuel tanks that we've overhauled, rebuilt, and reconditioned. This is in the yard of one of our mine customers. The tall orange radiator is for an Atlas Copco Pit Viper drill rig which we recored with our Rocore mechanically bonded radiator cores. The shorter orange [...]

2017-07-22T05:04:53+00:00July 22nd, 2017|Industrial & Heavy Equipment|

High Performance Engine Cylinder Boring and Torque Plate Honing

Here's some pics of a big block Chevy engine block we just finished boring and honing for a new set of oversize pistons and rings. This is a high performance engine build so we installed torque plates to the decks of the block with head gaskets before honing the cylinders. The torque plates simulate the [...]

2017-07-22T02:40:26+00:00July 22nd, 2017|Machine Shop|

Caterpillar 834H Rubber Tire Dozer Radiator, Aftercoolers, Oil Coolers, AC Condenser, and Complete Hardnose Repairing and Rebuilding

Here are some before and after pics of a Caterpillar 834H rubber tire dozer radiator hardnose assembly we rebuilt. The hardnose is basically the grill shell that contains the radiator, aftercoolers, oil coolers, and AC condenser. The radiator got a complete rod and repair overhaul and the coolers all got cleaned, flushed, ultrasonic [...]

2017-07-14T03:51:37+00:00July 14th, 2017|Radiator Shop|

Caterpillar and Komatsu Mining Haul Trucks Transporting with Big Radiators

Many times while we're on the road picking up and delivering radiators, fuel tanks, and other parts to the mines we have to pull over off the highway to make way for mining equipment that is being transported from one mine to another mine. Here are some pics we've taken of some of those [...]

2018-02-08T23:11:42+00:00July 14th, 2017|Industrial & Heavy Equipment|

Komatsu 830E haul truck L&M Mesabi Radiator Overhauling, Repairing, and Rebuilding

Here's some pics of a Komatsu 830E haul truck L&M Mesabi radiator that we're in the process of repairing and rebuilding. In these pics you can see the two halves are separated. One half is a lo-temp radiator and the other half is a hi-temp radiator. One half is completed and one half [...]

2017-07-14T03:14:56+00:00July 14th, 2017|Radiator Shop|

Yamaha YZ 250 and Honda TRX 250 Cylinder Jugs Bore and Hone For New Oversized Wiseco Forged Pistons and Deck Surface Milling

Here's a couple of powersports ATV motorcycle cylinder jugs that came in for a bore and hone. We mounted them in our Rottler boring bar and bored the cylinders oversize to within .005 of the new Wiseco forged pistons. We then secured them in our Sunnen CK10 cylinder hone and final honed them [...]

2017-07-14T03:00:00+00:00July 14th, 2017|Machine Shop|

1923 Durant Star Antique Radiator Recore, Tanks Repair, and Restoration

This is a 1923 Durant Star radiator that came in with a lot of leaks. We ended up recoring it with a new core. The top and bottom tanks were pretty beat up so we straightened them up as much as we could without destroying them. The radiator is in good sound shape [...]

2017-07-14T01:42:53+00:00July 14th, 2017|Radiator Shop|

5.9 Liter B-series Cummins Diesel Connecting Rods Polishing, Reconditioning, and Tapered Wrist Pin Bushings Replaced

Here's a set of six connecting rods for a 5.9 liter B-series Cummins inline six cylinder diesel engine. We cleaned the rods and magnafluxed them for cracks before polishing them. We then reconditioned the big ends with our Sunnen honing machine. We then used our tapered wrist pin bushing removal and installation tooling [...]

2017-07-14T01:15:10+00:00July 14th, 2017|Machine Shop|
Go to Top