Skip to content
This is an industrial copper and brass radiator out of a Caterpillar forklift. It came in due to a leak as well as a complaint of running hot. We disassembled it and the tubes which many people refer to as the cores were nearly plugged solid. So we rodded it out, boiled it [...]
This is a set of connecting rods for an 855 Cummins Big Cam III inline 6-cylinder diesel engine. We did a recondition or re-size on the big ends as they were severely out-of-round. The small ends are tapered with pressed-in wrist pin bushings. We used our tapered wrist pin fixture & tooling to [...]
This is a Caterpillar 16G grader radiator that we rebuilt for one of our mining customers. It is a Cat folded core style radiator that consists of radiator cores which we refer to as sections and one oil cooler core (section). Each section is disassembled & rebuilt like an individual radiator with a [...]
This is a 1.3 liter Yanmar cylinder head which goes onto a compact diesel engine that powers a John Deere tractor. We performed a complete valve job & surface to the cylinder head as well as a rod & repair to the radiator for it as well. Please gives us a call for [...]
This is an old 1923 Durant Star antique radiator that was shipped to us from a customer in the Carolina's. It is a cellular style radiator which are very delicate. The core has been previously repaired with some sort of putty or epoxy so we will be recoring this one with a new [...]
This is the cylinder head off of a 1930 Ford Model A engine we're working on. As you can see in the pictures it is severely pitted from rust corrosion as well as badly cracked from overheating. We will be replacing this one with a different cylinder head. Motor Mission Machine & Radiator [...]
This is an older copper and brass radiator for a 1978 Toyota Celica. The original core was pretty much used up so we re-cored it with a new high efficiency 2-row core. The electric fan was also attached with those plastic pins that go through the radiator core which damages the fins and [...]
This is a 637 cubic inch big block Chevy drag race engine we're freshening up. The block is a Dart with a 4.630 bore stuffed with some CP forged slugs. The cylinder heads are aluminum Dart Pontiac Big Chief's fully outfitted with Manley titanium intake & exhaust valves. The cam & lifters are [...]
This is a couple of Komatsu 830E Mesabi-style haul truck radiators we're performing a complete overhaul and rebuild to. One of them is an 830E DC and the other one is an 830E AC. One of them has 1,198 individual Mesabi L&M tubes and the other one has 1,292 tubes. Every tube is [...]
Here's a couple of older Cadillac engines we're doing some machine work and rebuilding to. The block in our Rottler boring bar getting its cylinders bored for some new oversize pistons is a 390 cubic inch Cadillac engine. The cylinder heads are for a 1957 365 cubic inch Cadillac engine that we're doing [...]
