Skip to content
This is a Caterpillar 793D haul truck radiator. This radiator is a Mesabi-style radiator which has nearly 1,000 individual L&M / Mesabi radiator tubes. Each tube was removed for pressure washing, ultrasonic cleaning, & buffing/polishing both ends of each tube. We then reassembled the radiator with all new upper & lower rubber grommets/seals. [...]
This is a custom copper and brass high efficiency radiator with a custom aluminum fan shroud with two Spal high performance electric fans. We custom built this radiator & shroud setup for a 1948 Nash street rod that is powered by a Dodge Chrysler Hemi V8 engine. Motor Mission Machine & Radiator 5435 [...]
This is a load of Ford truck brake rotors that were brought into us. We turned them on our brake lathe and got them true & straight. We can turn and machine rotors and drums for just about any application. Got Brakes? Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, [...]
Here's an older copper and brass radiator out of a 1957 Cadillac. We're also rebuilding the engine for this restoration project. The core was shot so we recored it with a new core. Our customer is doing a complete restoration to this Caddy and we're very happy he chose us to bring his [...]
This is a Cummins diesel 5.9 liter B-series 24-valve cylinder head during the machine work. We thermal cleaned the head and then performed a magnaflux for cracks. We then put the head in our TobinArp seat-and-guide machine in order to cut and machine the valve seats to complete the valve job. You can [...]
Here's some pics of a pick-up we made from one of our mine customers. It was cold & snowing but that didn't keep us from trucking on. We picked up a Komatsu 830E Mesabi-style haul truck radiator and a Caterpillar 793C folded core style haul truck radiator both for rebuilding. We'll post pictures [...]
This is a crankshaft that one of our local diesel mechanics brought in to be cleaned, measured, & machined. It cleaned up well & mic'd out good at standard on both the rod and main journals so we recommended a polish only rather than grinding it. The crankshaft is for a Continental engine [...]
This is a Chevy small block 350 V8 engine that we built into a 383 stroker. We started out by thermal cleaning the block in our Bayco thermal cleaning oven and then shotblasting the block in our Zero Blast-n-Peen shotblaster. We then performed a magnaflux to the block to detect for any cracks. [...]
This is an aluminum hydraulic oil cooler with an electric fan off of a Caterpillar 994F loader. This oil cooler came in completely dirty and covered in greasy dirt and mud due to an oil leak. So we pressure washed it, then boiled it clean in our hot tank vat and ultrasonic cleaning [...]
This is a press together crankshaft for a 1999 Kawasaki KX500. Along with the crank is a new connecting rod kit which has a new connecting rod, new shims, and new roller bearings. We will first take the crankshaft and rod pin apart with our press in order to remove the old connecting [...]
