Skip to content
This is a Hitachi EX5500 shovel radiator that we are doing a complete overhaul and rebuild to. This radiator is a dual radiator assembly that consists of a high temperature radiator and a low temperature radiator. In these pics one half of the radiator is in our test tank being pressure tested while [...]
This is a Mitsubishi 4G52 forklift cylinder head we performed a valve job & surface to. The 4G52 is notorious for developing cracks so we had to do some crack repair to this industrial aluminum cylinder head as well. After we got the crack fixed & repaired we pressure tested the head to [...]
This is a Caterpillar 793D Mesabi style haul truck radiator we're in the process of rebuilding. This is our spare 793 radiator that we're doing a complete overhaul to. Once we finish the rebuild on this radiator it will sit in our yard until a mine that runs the Cat 793D haul truck [...]
This is a 318 Dodge Chrysler V8 engine we're rebuilding. In these pics the block machine work is all done & it is ready for assembly. The cylinder heads have just had the hardened exhaust seat inserts installed so they are ready to go into our Tobin-Arp seat-and-guide machine for the 3-angle valve [...]
This is a radiator & CAC (charge-air-cooler) unit out of an International DT466E. It came in becuase the radiator was leaking so we did a rod & repair to the radiator & pressure tested the CAC. The CAC had some small leaks on the inlet side as well so we sealed both headers [...]
This is a 175 International crawler tractor radiator after we got it all rebuilt. The top tank is a bolt-on while the bottom tank is a solder-on. We removed both tanks so we could rod out the tubes of the core & then boil it out in our ultrasonic. This radiator was a [...]
Here's a dream engine for many of us gearheads. A 427 cid (cubic inch displacement) SOHC (single overhead cam) Ford V8 engine with a roots style blower. These brutes are commonly referred to as a Cammer engine or just simply Cammers. We'll just leave this here & dream on!! [...]
This is a post of some Caterpillar 994F loader hydraulic oil cooler & steering oil cooler for cleaning & flushing at Motor Mission Machine & Radiator. There are some pics before we did any cleaning as soon as the oil coolers came in. Then there are some pics of the oil coolers after [...]
It's been an FE frenzy around here lately. This is another 360 Ford FE engine block & cylinder heads that we did all the machine work to. We performed a bore & hone to the cylinders for new oversize pistons & rings, surfaced the decks square & flat, align honed the housing bore [...]
This is a copper & brass radiator for a 1957 Cadillac that we're rebuilding the engine for as well. This radiator has been repaired in the past and it is heavily corroded internally so we are going to recore the radiator with a new core. This is the original radiator as it still [...]
