Skip to content
Here's some pics of a Caterpillar D10T hardnose cooling package we rebuilt. This cooling system has the Caterpillar AMOCS modular radiator cores for engine cooling. The two aluminum aftercoolers, an aluminum oil cooler, ac condenser, hydraulic fan drive, fan blade, multiple hoses & electrical wiring were all addressed & brought up to snuff for another [...]
Here's some pics of a custom pulley we machined for a big block Chevy. Most of the custom pulley machining we do is done out of a solid piece of billet aluminum round stock. This pulley is machined to a smaller diameter than what is available off the shelf from the normal suppliers. The smaller [...]
Here’s some pics of a cooling stack off of a Caterpillar 6060FS shovel. The cooling stack consists of the radiator & intercooler which bolt together for a complete drop-in cooling package. Both the radiator & intercooler, or aftercooler/cac, are constructed of all aluminum. 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or [...]
Here’s some pics of a Caterpillar D10T hardnose grill guard going through the rebuilding process. The upper left & right mounting blocks were badly worn so we cut them off, machined up some new ones out of a high grade alloy steel & welded them onto the hardnose. The lower bolting block for the grill [...]
Here’s some pics of a Caterpillar D10T hardnose, or nosecone we picked up for repair & rebuilding. This cooling package consists of the Caterpillar AMOCS (Advanced Modular Cooling System) type radiator. There are twelve individual cores, or sections, that make up the radiator. Ten long cores & two short cores/sections. We also picked up the [...]
Here’s some pics of a Caterpillar D10T2 dozer, or bulldozer, hardnose cooling package we rebuilt & delivered back to our customer. The hardnose, or nosecone, contains two aluminum radiators, two aluminum aftercoolers, or CAC's, an aluminum oil cooler & an aluminum ac condenser all of which we reconditioned. The fan blade & hydraulic fan motor [...]
Here’s some pics of a Caterpillar 16M grader axle on our trailer for delivery. All the bores were machined, welded up & bored back to the new spec sizes. New bushings & seals have been installed prior to final assembly with new pins & hardware. All the components of the axle have been rebuilt & [...]
Here’s some pics of a Caterpillar D7H dozer radiator we reman'd. The radiator came in with some leaks from getting blasted by the fan. The sandblast grid that is supposed to protect the radiator tubes & fins from getting pelted with debris from the fan was deteriorated itself & unable to protect the radiator. We [...]
Here’s some pics of a project we completed for some custom splined shafts. The shafts drive the PTO from a hydraulic pump for a tire handler that is used for lifting large mining equipment tires. The shafts required an external spline on one end & an internal spline on the other end. After all the [...]
Here’s some pics of a Caterpillar D10T2 hardnose we picked up for repair & rebuilding. This hardnose contains two aluminum radiators, two aluminum aftercoolers (CAC's), an aluminum oil cooler & an aluminum AC condenser in addition to the fan blade & hydraulic fan motor. There's more parts in there as well that make up the [...]
