Skip to content
Here’s some pics of a Caterpillar D10T hardnose cooling package we rebuilt. We disassembled the entire nosecone assembly down to the bare grill guard housing. The hardnose had some cracks which we prepped & welded. The radiator that mounts inside the nosecone is a Mesabi type which got completely rebuilt & pressure tested. Both aftercoolers [...]
Here’s some pics of a Caterpillar 16M Grader Circle & Drawbar assembly with the circle drive motor & the moldboard. We completely disassembled it so each piece could be blasted, checked for cracks, inspected, welded, machined & repaired. After all the welding & machining was completed we assembled the complete unit with all new wear [...]
Here’s a few pics of an all metal copper & brass radiator we are rebuilding. In these pics one of our radiator technicians is melting the solder off of the header plate at the tube-to-header joints. This is what we call running the headers. After all the old solder is removed & the area is [...]
Here’s some pics of a Mopar crankshaft & harmonic balancer for a supercharged engine. In order to strengthen the balancer on the snout of the crankshaft for the extra pressure from driving the blower an extra keyway & woodruff key are needed. To do this we machine a slot in the snout of the crank [...]
Here’s some pics of some aluminum oil coolers & a radiator for a mining drill rig we completed. All of the units received a thorough cleaning internally & externally. After pressure testing to see where they were leaking we proceeded with the appropriate repairs. After final pressure testing to ensure they all have no leaks [...]
Here’s some pics of an onsite repair service we did at a local Las Vegas resort. The Caterpillar generator radiator had some leaks due to pinholes that developed in the top hose connection. The top hose connection had to be cleaned & prepped which revealed the holes in the pipe, or steel tube that makes [...]
Here’s some pics of a pair of Caterpillar 16G Grader Chain Case Housings we reconditioned. Both housings came in with cracks & dents from the inside out. The chain inside came apart which damaged the hoisings & caused them to leak oil. We cut out some of the damaged areas & welded new sections in [...]
Here’s some pics of a radiator core from a radiator that came in for a rod & repair. The tubes are plugged internally & need to be rodded out. There's also a bit of corrosion & fouling taking place. Nothing our ultrasonic cleaning & full rebuilding can't handle. 5435 Desert Point Dr. Las Vegas, Nv. [...]
Here’s some pics of some Caterpillar 16G grader parts we picked up from one of our mining customers for repairing & rebuilding. The piece on the front of the trailer is a complete front axle assembly. The piece on the back of the trailer is a grader circle & drawbar assembly. 5435 Desert Point Dr. [...]
Here’s some pics of a Caterpillar D10T dozer hardnose cooling package we picked up for rebuilding. The radiator has been changed from the Cat AMOCS type to a Mesabi. The entire nosecone assembly will be dismantled & each piece & part cleaned, inspected & repaired as necessary. 5435 Desert Point Dr. Las Vegas, Nv. 89118 [...]
