Skip to content
Here are some before & after pics of some cast iron & aluminum cylinder heads we had in for machining. The two cast iron heads are 350 Chevy Vortec heads that both magnafluxed good with no visual cracks. The surfaces were both warped & required milling the decks square & flat. The aluminum head is [...]
Here are some before & after pics of a hardnose radiator cooling package we reconditioned for a Caterpillar 834H RTD (Rubber Tire Dozer), or wheel dozer. The cooling system components included cleaning, repairing & rebuilding the aluminum modular radiator core sections, an oil cooler, the air-to-air or charge air cooler (aftercooler) and the AC (air [...]
Here are some pics of a blade hanger we reconditioned. The piece is labeled as a bracket by Caterpillar with part number 478-8991. The blade, or moldboard, on an 18M grader hang from this bracket. The rectangular shaped slots house brass wear shims which the blade, or moldboard, slide in. We first machine the three [...]
Here are some pics of a radiator off of a Hitachi EX5600-7 shovel that we picked up for a repair & return. The radiator is leaking in the corners as well as the gaskets. The side frame has been hit near the center which has the radiator in bind which has lead to the leaks. [...]
Here are some before & after pics of a bolt-on radiator we had come in leaking. The radiator is off of a Terex T340XL crane. We ended up doing a complete rebuild to it after repairing the leak. We re-soldered the tube-to-header joints by re-running the headers at both ends. Motor Mission Machine & Radiator [...]
Here are some pics of some parts we've been machining & working on for the Speed UTV's. We have come up with our own version of a manual alternator belt tensioner. We only have a couple hundred miles on it right now but so far it appears to be holding up well & the belt [...]
Here are some pics of a Hitachi EX5600-6 Shovel Radiator we did a complete overhaul to. The radiator came in with some tubes leaking. The lower mounting feet, or pads, were warped & not flat where the radiator mounts to the machine. We cut & relaxed the mounting pads/feet, welded them back in place & [...]
Here are some pics of a Caterpillar 18M3 grader circle, drawbar table and moldboard blade hanger bracket we did a complete repair & rebuild to. The main beams on the drawbar table were both cracked all the way through. We cut the main beams off, straightened the table & welded new beams in place. The [...]
Here are some before & after pics of a couple of Sullair air compressor coolers that came in for service. Both coolers are made of aluminum & had extensive external fouling & build-up of oily debris. After thoroughly cleaning both coolers externally they were both internally flushed before pressure testing. Once we located the leaks [...]
Here are some pics of a custom copper brass high efficiency radiator we completed for a rat rod. The radiator is small in order to fit where our customer has planned to install it. The radiator is basically an auxiliary heat exchanger which will be used for cooling the supercharger on the engine. The radiator [...]
