Skip to content
Here's a load of Caterpillar mining equipment parts we picked up for repair & rebuilding. Some of these parts will be available for exchange. On the front of the trailer is an A-Frame assembly & a fuel tank for a 793C haul truck. The two radiators with AC condensers are for a 789B haul truck. [...]
This is a Caterpillar 16G grader circle we're repairing. The surface is worn & gouged where the shims ride. We're welding the surface to build it up & fill in all the low spots. Machining the surface flat & smooth is up next. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. [...]
This is a Caterpillar 993K loader hardnose cooling package that came in for a complete overhaul. Inside the hardnose there are eighteen aluminum AMOCS modular radiator cores, two hydraulic oil coolers & two aftercoolers. The fan & hydraulic fan motor are part of the package as well. Motor Mission Machine & Radiator 5435 Desert Point [...]
Here's some progress pics of the tanks & sideframes of a Mesabi radiator & oil cooler assembly. This radiator & oil cooler is for a Komatsu WA1200 loader that's used in an open pit mine. The next step is to clean all the bores & check them with the go-no-go gauge for size. Then all [...]
This is a Caterpillar 16G Grader Circle that we have in with the drawbar & moldboard for repairs & rebuilding. The teeth were worn & damaged so we cut the bad ones out & welded in some new segments. The next step is to weld the damaged & worn areas of the top surface & [...]
Here's a load of Caterpillar mining equipment radiators we picked up for repair & return. The radiator on the stand is a 793C haul truck radiator. The two radiators laying down are for a 6060FS shovel excavator. We'll get them cleaned up, repaired, pressure tested & ready for another round of service. Motor Mission Machine [...]
This is a set of aluminum 460 Ford Cobra Jet Cylinder Heads that came in for some machine work. The surfaces of both heads were pitted from corrosion as well as dinged up from some rough handling. We mounted the heads on our dual axis leveling fixture in our Rottle CNC machine & leveled them [...]
Here’s a couple of Caterpillar #393-5047 radiators we delivered on our exchange program. These radiators are for a D10T2 dozer. Both radiators are constructed with aluminum bar-and-plate cores with cast aluminum tanks. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com [...]
This is a Caterpillar 994K loader hardnose radiator & cooling system components package. We removed the twenty one radiator cores, two aftercoolers, two transmission oil coolers, five steering coolers, rear brake cooler & AC condenser for cleaning & repairs. The hardnose was cleaned inside & out, inspected for cracks & welded where necessary. It was [...]
Here’s a load of Caterpillar AMOCS (Advanced Modular Cooling System) modular radiator cores we did a repair & return to our customer. These radiator cores are for a D10T dozer. There are twelve total cores. Ten of them are 204-7184 & two of them are 213-9906. We got them all cleaned internally & externally as [...]
