Skip to content
Here's some progress pics of a Caterpillar 16M Grader Axle we're rebuilding. There are some pictures during disassembly of the axle assembly along with some setup for machining pics. The spindle housing & lean arm have been blasted so they can be dye checked for cracks. After they pass the crack detection & inspection process [...]
Here’s some pics of a PHE, Plate Heat Exchanger, we picked up for servicing. This plate frame Heat Exchanger has two hundred & forty six plates. Each plate will be removed for cleaning & inspection. Once all the plates have been qualified for re-use or replaced as necessary we will reinstall the plates into the [...]
Here’s some pics of a lean arm we have in for repair. The lean arm goes on each end of a grader front axle. This one is for an 18M Caterpillar grader. We first thermal clean & blast the these parts down to raw metal so we can dye check & magnflux them for cracks. [...]
Here’s some pics of a crankhole bolt-on radiator we did a repair & rebuild to, or what we call, a rod & repair. This radiator has a crankhole, or crank box in it for a PTO (power take-off) to pass through it. We repair & rebuild these radiators for Republic Services, Burrtec & Waste Management [...]
Here’s some pics of Caterpillar D10 bulldozer hardnose cooling package we reconditioned. This cooling package is off of a newer Cat machine which can be recognized by the new style logo which represents the power edge or modern hex era of equipment. All of the cooling system components such as the radiator, the two aftercoolers, [...]
Here’s some pics of a gas tank that came in for cleaning & repair due to rotten & varnished gas inside the tank. We eneded up having to cut the tank apart because the fuel pick-up tube was plugged solid. The internal reservoir at the end of the pick-up tube was plastic & housed a [...]
Here’s some pics of a couple of Caterpillar haul truck radiators we're disassembling for cleaning & repair. The stack of sixty folded radiator cores are for a 793C haul truck. The other radiator is a 793F Mesabi with just about all of its seven hundred & sixty eight tubes removed from the tanks & sideframes [...]
Here's some before & after pics of a cast iron diesel exhaust manifold that came in for surfacing. The flanges were not sitting at the same plane to each other which was causing excessive exhaust leaks between the exhaust manifold & the cylinder head. Surfacing the exhaust flanges flat from one end to the other [...]
Here’s some pics of an aluminum radiator & oil cooler that we had come in for repairing & rebuilding. They are both off of an Atlas Copco, or Epiroc, PV271 (Pit Viper) drill rig. We got them both cleaned up inside & out, repaired & pressure tested with no leaks. They are now ready for [...]
Here’s some pics of a Hitachi EX5600 shovel radiator that needed some recoring. All eight cores were in pretty bad shape so we recored both the high temp radiator as well as the low temp radiator with new heavy duty high efficiency cores. After pressure testing each radiator half to ensure they had no leaks [...]
