adminmmmr

About adminmmmr

This author has not yet filled in any details.
So far adminmmmr has created 1894 blog entries.

Big Block Chevy Stroker Engine With AFR Aluminum Heads and T&D Shaft Rocker Arms

This is a high performance big block Chvey engine that's outfitted with a set of AFR (Air Flow Research) aluminum cylinder heads. The rockers arms are shaft type untis from T&D. Here we are checking for proper rocker arm to valve tip contact & valvetrain geometry. Once we have it all set where we want [...]

2020-10-30T14:15:00+00:00October 30th, 2020|Machine Shop|

Old Antique Ford Model T Copper Brass Radiator Repair, Rebuilding and Restoration

This is an old copper brass radiator for a Ford Model T. The radiator came in with several small leaks. We removed the tank & rodded the tubes as they were nearly 100% plugged internally. We got all the tubes cleared & flowing again & pressure tested it to ensure there are no leaks. Motor [...]

2020-10-29T14:58:23+00:00October 28th, 2020|Radiator Shop|

Chevy 5.7 Liter LS1 Stroker Engine Build To A 427

Here's some pics of an LS1 stroker engine we're getting ready for assembly. The engine will end up with 427 cubic inches. The internal parts consist of a steel stroker crank, h-beam connecting rods & Wiseco forged pistons. Everything will be held together with ARP fasteners. Motor Mission Machine & Radiator 5435 Desert Point Dr. [...]

2020-10-28T01:04:45+00:00October 28th, 2020|Machine Shop|

Caterpillar D8R Dozer Radiator Cores and Folded Radiator Core Sections

Here's a couple of Caterpillar construction & mining equipment radiator parts we're working on. The short square sections are modular radiator cores for a D8R dozer. The flat panel sections are folded radiator core sections for a larger haul truck radiator. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: [...]

2020-10-26T23:56:41+00:00October 26th, 2020|Radiator Shop|

Caterpillar Loader Oscillating Axle Trunnion and Pinion Support Repairing and Reconditioning

Here's some Caterpillar loader & rubber tire dozer oscillating axle trunnion & pinion supports that we reconditioned. The bores & the mounting pad surfaces were worn & fretted. We machined & bored them to true them up, then welded them to build the surfaces back up. We then bored & machined the welded areas of [...]

2020-10-23T20:35:37+00:00October 23rd, 2020|Machine Shop|

Epiroc Atlas Copco Ingersoll Drill Rig Aluminum Radiator and Compressor Oil Cooler Repair and Reconditioning

This is an aluminum radiator & aluminum oil cooler off of a drill rig. These particular units are off of an Epiroc which are similar to the Atlas Copco & Ingersoll Rand drill rig cooling systems. Both units were extremely plugged which was causing overheating issues. We got them both cleaned up inside & out [...]

2020-10-22T02:44:30+00:00October 22nd, 2020|Radiator Shop|

Caterpillar 3406E C15 Diesel Engine Cylinder Head Valve Job and Surface Machining

This is a Caterpillar 3406E / C15 style cylinder head we did a valve job & surface to. The surface of the head was warped so we mounted it on our Rottler multipurpose CNC milling & boring machine. After we got the surface flat & square the valve recessions needed to be adjusted back to [...]

2020-10-21T00:14:58+00:00October 21st, 2020|Machine Shop|

Caterpillar 773 Lube Truck Radiator Recore Repair

This is a Caterpillar 773 lube truck radiator. This radiator is made with a conventional core which had seen better days. Our customer agreed to have us recore the radiator with a new heavy duty high efficiency core. Also on the trailer for delivery are some Cat dozer modular radiator cores or sections, a Cat [...]

2020-10-20T00:26:58+00:00October 20th, 2020|Radiator Shop|

Caterpillar 785B and 789B Folded Core Mining Haul Truck Radiators

Here's a couple of Caterpillar mining haul truck radiators we picked up from one of the mines for repair & return. The radiator on the front of the trailer is a 789B & the smaller one behind it is for a 785B. They both are Cat folded core type radiators. Motor Mission Machine & Radiator [...]

2020-10-10T02:14:07+00:00October 10th, 2020|Radiator Shop|

4.3 Chevy V6 Marine Engine Machining and Assembly

This is a Mercruiser 4.3 liter Chevy V6 engine we're rebuilding for a marine application. All the machine work was done to the block which included align honing the housing bore, surfacing & squaring the decks of the block & boring & honing the cylinders for new oversize pistons & moly rings. The cylinder heads [...]

2020-10-08T22:55:09+00:00October 8th, 2020|Machine Shop|
Go to Top