adminmmmr

About adminmmmr

This author has not yet filled in any details.
So far adminmmmr has created 1894 blog entries.

Plated Cylinder Honing With Diamond Stones For A Dirt Bike

This is a plated cylinder for a dirt bike. The cylinder finish was slightly scored & scratched so we honed it out with our diamond stones & got it cleaned up within spec for a new standard piston & rings. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) [...]

2020-06-05T15:54:02+00:00June 5th, 2020|Machine Shop|

Hitachi EX5500 Shovel Industrial Radiator Service

This is a Hitachi EX5500 shovel radiator we're rebuilding. This radiator consists of a Low Temp Circuit & a High Temp Circuit. Basically two radiators consisting of two cores each to make the complete radiator assembly. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 [...]

2020-06-04T13:03:58+00:00June 4th, 2020|Radiator Shop|

Pontiac GTO 389 Cast Iron V8 Cylinder Heads Valve Job and Surface

This is a set of Pontiac GTO 389 cubic inch V8 engine cylinder heads. We did a complete rebuild consisting of a valve job, surfacing & squaring the decks, machining for screw-in studs & guide plates and machining the spring pockets for a set of valve springs for the hydraulic roller camshaft. They will be [...]

2020-06-03T01:47:00+00:00June 3rd, 2020|Machine Shop|

Caterpillar 777 Triple Seven Folded Core Radiator

This is a Caterpillar 777 haul truck mining radiator we picked up for repairing & rebuilding. This one came in complete with the shrouding, fan guard & the fan. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission

2020-06-02T03:15:37+00:00June 2nd, 2020|Radiator Shop|

Ford Ranger 4.0 V6 Engine Machine Work and Complete Rebuild

This is an early 90's Ford Ranger 4.0 liter V6 engine we're rebuilding. The cylinders have been bored & honed for new oversize pistons & moly rings, the housing bore has been align honed for new main bearings & the decks have been surfaced & squared for new head gaskets. The crankshaft has been ground [...]

2020-05-30T16:05:38+00:00May 30th, 2020|Machine Shop|

Caterpillar 793C Folded Core Radiator Picked Up For Repair and Rebuilding

This is a Caterpillar 793C haul truck radiator we picked up for repair & rebuilding. The 793C radiator consists of sixty folded radiator cores. Each core, or section, will get cleaned & rebuilt with a rod & repair. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or [...]

2020-05-29T00:54:01+00:00May 29th, 2020|Radiator Shop|

Caterpillar 16G Grader Axle Bores Welding, Line Boring and Complete Rebuilding

This is a Caterpillar 16G grader Axle we did a complete rebuild & overhaul to. We completely disassembled the axle & blasted all the parts down to bare metal. Each bore was then line bored, welded & machined back out to spec for new bushings & pins. Motor Mission Machine & Radiator 5435 Desert Point [...]

2020-05-28T03:55:23+00:00May 28th, 2020|Industrial & Heavy Equipment|

LeTourneau L1850 Loader Mesabi Radiator and Caterpillar 16G Grader Axle Repairing and Rebuilding Delivery

This is a LeTourneau L1850 Loader Mesabi radiator we picked up last Tuesday & delivered back to our mining customer the following Tuesday. We did a complete tear down & rebuild overhaul to the radiator. We also delivered a Caterpillar 16G grader axle that we completely disassembled for repairing, welding & a full rebuild overhaul [...]

2020-05-27T00:04:55+00:00May 27th, 2020|Industrial & Heavy Equipment|

LeTourneau Loader Mesabi Radiator Rebuilding Overhaul and Pressure Testing

This is a LeTourneau L1850 loader radiator that cools an MTU diesel engine. The radiator is a Mesabi & it is comprised of a high & low temperature radiator circuit as well as an oil cooler section. We did the complete rebuild in four days in order to meet our customers needs. Motor Mission Machine [...]

2020-05-24T22:54:46+00:00May 24th, 2020|Radiator Shop|

Caterpillar Grader Axle Repairing, Welding, Machining and Rebuilding

This is a Caterpillar 16G grader Axle we are repairing & rebuilding. We welded the ID of the ends where the lean bars go & we have it mounted on our CNC mill machining the ID's back to the proper dimension. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: [...]

2020-05-23T02:31:07+00:00May 23rd, 2020|Machine Shop|
Go to Top