Custom Machining To Duplicate A Tractor Bushing With Holes
These are some pictures of a tractor bushing that was brought into us. Our customer wanted us to duplicate the bushing on the left. The bushing on the right in the pictures is [...]
Rebuilt Komatsu 830E Haul Truck Mesabi Style Radiator
This is a Komatsu 830E haul truck Mesabi style radiator that we did a complete rebuild and overhaul to. After the family helped assemble this one we got it loaded up and headed [...]
Ford Mustang 289 V8 Engine Machine Work For Rebuild
This is a 289 cubic inch Ford V8 engine for a 1967 Mustang. The engine had been previously rebuilt but it wasn't machined & assembled correctly and suffered some internal damage. We ended [...]
Komatsu 830E Mesabi Radiator Getting Assembled By The Family
This is a Komatsu 830E Mesabi style haul truck radiator that is going together. We got an expected call from our mining customer that they needed the radiator ASAP so we had to [...]
Rusted Pitted & Corroded Cylinder Revealed After Boring
Here's some pics of a cylinder that is rusted and pitted from water and coolant getting into the cylinder. Our customer wanted to see if it would clean up by boring and honing. [...]
Komatsu 830E AC Haul Truck Mesabi Radiator Rebuild
This is a Komatsu 830E AC haul truck Mesabi style radiator we have in the shop for a complete rebuild and overhaul. It is in the process of getting all 1,292 of its [...]
401 Buick Nailhead Block For Surface Cracks Repair
This is a 401 Buick Nailhead block that came into the machine shop for crack repair. The block was cracked on both deck surfaces from the head bolt holes into the coolant jacket [...]
1948 Nash Hemi Powered Customer Copper Brass Radiator
This is a custom copper and brass radiator with a custom aluminum fan shroud with two high performance Spal electric fans that we built for a 1948 Nash that is powered by a [...]
Powerstroke Tapered Wrist Pin Bushing Replacement and Machining
This post is for a set of 6.0 liter Ford diesel Powerstroke connecting rods with tapered wrist pin bushings. We have one connecting rod that is bent so we will be replacing that [...]
1956 Classic Chevy Truck High Performance Radiator Build
This is a custom copper and brass high efficiency 4-row radiator we built for a 1956 Chevy classic truck. The picture of the old radiator shows the pattern we used to build the [...]
Radiator Repair With The Torch and Running The Header
This is a picture of a radiator on the radiator lift being repaired. This is what we call running the header which involves melting all of the old solder off of the header [...]
Skidsteer Tractor Pivot Bracket and Pins Machined and Duplicated
This is a pivot bracket with pins that we made for a skidsteer tractor. The old bent up part was brought to us to see if we could make a new one along [...]











