Skip to content
Custom High Efficiency Copper Brass Crossflow Radiators Build
These pics are of a couple of high performance custom copper & brass crossflow radiators we built. The smaller radiator is for a 1948 Nash that's powered by a 392 Hemi. The larger [...]
318 Dodge Performance Engine Build For 1947 Chrysler
This is a Dodge 318 V8 performance engine we rebuilt for a 1947 Chrysler sedan. The engine came in after sitting out in the elements for several years. We thermal cleaned & blasted [...]
Caterpillar 793 Haul Truck Mesabi Spare Radiator Overhaul
This is a Caterpillar 793D haul truck radiator. This radiator is a Mesabi-style radiator which has nearly 1,000 individual L&M / Mesabi radiator tubes. Each tube was removed for pressure washing, ultrasonic cleaning, [...]
Hemi Powered 1948 Nash Street Rod Custom Radiator
This is a custom copper and brass high efficiency radiator with a custom aluminum fan shroud with two Spal high performance electric fans. We custom built this radiator & shroud setup for a [...]
Brake Rotor and Drum Turning and Machining
This is a load of Ford truck brake rotors that were brought into us. We turned them on our brake lathe and got them true & straight. We can turn and machine rotors [...]
1957 Caddy Cadillac Copper and Brass Radiator Recore
Here's an older copper and brass radiator out of a 1957 Cadillac. We're also rebuilding the engine for this restoration project. The core was shot so we recored it with a new core. [...]
Cummins Diesel 5.9 Liter B-Series 24 Valve Cylinder Head Valve Job
This is a Cummins diesel 5.9 liter B-series 24-valve cylinder head during the machine work. We thermal cleaned the head and then performed a magnaflux for cracks. We then put the head in [...]
Komatsu 830E Mesabi Radiator and Caterpillar 793 Radiator For Rebuilding
Here's some pics of a pick-up we made from one of our mine customers. It was cold & snowing but that didn't keep us from trucking on. We picked up a Komatsu 830E [...]
Lincoln Welder Continental F163 Crankshaft Grinding and Polishing
This is a crankshaft that one of our local diesel mechanics brought in to be cleaned, measured, & machined. It cleaned up well & mic'd out good at standard on both the rod [...]
Chevy Small Block 383 Stroker Engine With Eagle Forged Crankshaft, Connecting Rods, and KB Claimer Pistons Build
This is a Chevy small block 350 V8 engine that we built into a 383 stroker. We started out by thermal cleaning the block in our Bayco thermal cleaning oven and then shotblasting [...]
Caterpillar 994 Loader Aluminum Hydraulic Oil CoolerWith Electric Fan For Cleaning, Flushing, Welding Repair, And Pressure Test
This is an aluminum hydraulic oil cooler with an electric fan off of a Caterpillar 994F loader. This oil cooler came in completely dirty and covered in greasy dirt and mud due to [...]
Kawasaki KX500 Press Together Crankshaft With New Connecting Rod Kit With Straightening & Balancing
This is a press together crankshaft for a 1999 Kawasaki KX500. Along with the crank is a new connecting rod kit which has a new connecting rod, new shims, and new roller bearings. [...]