Skip to content
2-Stroke Motorcycle ATV Cylinder Bore & Hone For New Oversize Piston at Las Vegas Machine Shop Motor Mission
This is a 2-stroke motorcycle ATV cylinder jug that came in for a bore and hone. It is an aluminum air cooled engine so that is what all the fins around the outside [...]
Machine Shop: 318 Dodge Chrysler V8 Engine Machine Work: Bore, Hone, Rod Reconditioning, Piston Installation at Las Vegas Machine Shop
This is a 318 Dodge Chrysler Plymouth V8 engine that we performed some machine work to here at our fully equipped Las Vegas machine shop. We did a bore and hone to the [...]
Plugged Forklift Radiator Core Needs Rodding Out At Las Vegas Radiator Shop
This is the radiator core of a forklift radiator that came in overheating. These pictures are of the top header after we got the top tank removed. As you can see, all the [...]
360 Ford FE Engine & Cylinder Head Machine Work & Complete Engine Rebuild By Las Vegas Machine Shop Motor Mission
This is a 360 cubic inch Ford FE (Ford Edsel) V8 engine that we are doing a rebuild to. In this post we have the pistons and connecting rods installed in the right [...]
Aluminum Lamborghini Radiators For Repair & Recore at the Las Vegas Radiator Shop Motor Mission Machine & Radiator
Here's a couple of aluminum radiators for a 2006 Lamborghini that came in to be repaired. Our customer previously had them at another radiator shop but he wasn't satisfied with their work as [...]
430 Ford Lincoln MEL V8 Engine Machine Work, Valve Job & Surface and Shortblock Assembly Rebuild by Las Vegas Machine Shop
This is a Ford Lincoln 430 cubic inch V8 engine from the '60's that came in for a rebuild. We completely cleaned, magnafluxed, measured, and inspected the block, crank, connecting rods, & cylinder [...]
Komatsu WA900 Loader Radiator with Intercooler Charge Air Coolers Recore & Overhaul
This is a Komatsu WA900 loader radiator with two intercooler charge air coolers attached to it. The complete radiator and coolers assembly came in to be cleaned, overhauled, and repaired. The core of [...]
Komatsu WA1200 Loader Mesabi L&M Style Radiator Rebuild & Overhaul by Las Vegas Radiator Shop
This is a Komatsu WA1200 loader Mesabi style radiator & oil cooler assembly that we overhauled. The radiator came in to be completely rebuilt and cleaned out. We removed each of the individual [...]
60’s Lincoln Ford Crossflow Radiator & Surge Tank Repair, Rebuild, Overhaul, Recore Restoration
This is an older copper and brass radiator from a 60's Ford Lincoln that came in for an overhaul, rod and repair, recore. The surge tank was brought in as well. The core [...]
Cummins 8.3 liter diesel connecting rod reconditioning & resizing with new wrist pin bushings at Las Vegas Machine Shop
This is a set of Cummins 8.3 liter diesel connecting rods that came in for reconditioning and resizing along with the replacement of the wrist pin bushings. For all of your machine work [...]
1939 Cadillac LaSalle Flathead V8 Engine Copper & Brass Flat Fin Radiator Rebuild & Restoration By Las Vegas Radiator Shop
This is an old original copper & brass radiator with a continued flat fin core. The radiator is off of a 1939 Cadillac LaSalle which has a flathead V8 engine. Because the flathead [...]
3.8 Liter GM Pontiac 3800 Cast Iron V6 Cylinder Heads Rebuilt & Reconditioned by Las Vegas Machine Shop
This is a set of 3.8 liter GM Pontiac 3800 cast iron V6 cylinder heads. We completely rebuilt & reconditioned the heads by performing a three angle valve job and surface to them. [...]