Skip to content
Caterpillar 2W5540 Folded Radiator Cores, NGMR (Next Generation Modular Radiator) Cores, & AMOCS 119-4774 Cores For Rebuild & Overhaul
Here's a bunch of Caterpillar cores we've been rebuilding and overhauling here at Motor Mission. In the pics are a bunch of Caterpillar part number 2W5540 folded radiator cores. We rebuild a lot [...]
Cast Iron Stove Handle Broken Bolt and Stud Removal With Thread Repair
This is a cast iron stove handle that was sent into us for some repair. The stove handle had a broken bolt in it so we had to machine out the broken bolt [...]
Chrysler Dodge 318 V8 Cast Iron Cylinder Block Bore and Hone With Rottler Boring Bar and Sunnen CK10 Cylinder Hone
This is a Chrysler Dodge 318 cast iron V8 cylinder block. The block is sitting in our Sunnen CK10 cylinder hone. We just pulled it off of our Rottler boring bar where we [...]
Caterpillar 740 Volvo Articulating Dump Haul Truck Wiggle Wagon Radiator, Cooler, and AC Condenser In The Shroud Assembly Rebuild
This is a Caterpillar 740 dump truck radiator, oil cooler, and AC condenser we rebuilt for one of our mining customers in Northern Nevada. This haul truck is a Caterpillar & Volvo machine. [...]
4.3 Liter 265 Cubic Inch Dodge Chrysler Plymouth Inline Six Cylinder Flathead Engine Rebuilt Rebuild
This is a 4.3 liter 265 cubic inch Dodge Chrysler Plymouth inline six cylinder flathead engine that we just finished rebuilding. This engine is out of a hay squeeze which is basically a [...]
Caterpillar 336E Excavator Trackhoe Track hoe Backhoe Plastic Aluminum Radiator For Rod and Repair
This is a plastic and aluminum radiator out of a Caterpillar 336E excavator trackhoe track hoe backhoe radiator that came in for a rod and repair. This radiator is made of an aluminum [...]
318 Dodge Magnum V8 Engine Block, Crankshaft, and Connecting Rods For Machining and Machine Work
This is a 318 cubic inch Dodge Magnum V8 engine cylinder block, crankshaft, & pistons on the connecting rods that came in for machine work. After cleaning, magnafluxing for cracks, measuring, & inspecting [...]
Vehicle Mounted Hot Water Heat Exchanger For Warm Hot Shower From Engine Coolant of Off Road 4×4 Camping Jeep Bronco Truck
This is a copper and brass heat exchanger we built at a customer's request. It is similar to the old original R&M Specialty Products vehicle mounted hot water element that is no longer [...]
All Aluminum Custom Radiator For A Caterpillar 16M Grader To Replace The Original Plastic Aluminum Radiator
This is an all aluminum radiator custom built to replace an aluminum radiator core with plastic tanks / caps for a Caterpillar 16M Grader. The original radiator had some leaks in the core [...]
Mitsubishi Montero 3.0 V6 Aluminum SOHC Single Overhead Cam 24 Valve Cylinder Heads Valve Job & Surface Mill
This is a set of Mitsubishi Montero 3.0 V6 aluminum cylinder heads that we performed a three angle valve job and surface to. These heads are SOHC which stands for single overhead cam. [...]
Freightliner Cascadia Plastic Aluminum Radiator Repair & Plastic Top Tank Cap Replaced Due To Fan Damage
This is a Freightliner Cascadia class 8 tractor semi truck radiator that came in for a repair. The aluminum radiator core suffered damage from the fan and debris. The top and bottom tanks, [...]
Dart Big M big block Chevy cylinder block Align Hone or Line Hone of the Housing Bore For a Dragster Drag Race Engine
Here's some pics of a Dart Big M cylinder block for a big block Chevy dragster engine we're freshening up. This engine is a 637 cubic inch naturally aspirated engine though it is [...]