Skip to content
Caterpillar Grader Axle Lean Arm Blasting, Magnafluxing, Welding, Boring and Machining
Here’s some pics of a lean arm we have in for repair. The lean arm goes on each end of a grader front axle. This one is for an 18M Caterpillar grader. We first thermal [...]
Garbage Truck Bolt-On Crankhole Radiator Repairing and Rebuilding For Republic Services, Burrtec and Waste Management Autocar Refuse Trucks
Here’s some pics of a crankhole bolt-on radiator we did a repair & rebuild to, or what we call, a rod & repair. This radiator has a crankhole, or crank box in it for a [...]
Caterpillar D10 Power Edge Modern Hex Bulldozer Hardnose Cooling Package Remanufacturing
Here’s some pics of Caterpillar D10 bulldozer hardnose cooling package we reconditioned. This cooling package is off of a newer Cat machine which can be recognized by the new style logo which represents the power [...]
Gas Tank With Rotten Varnished Gas Cleaning, Repairing and Renewing
Here’s some pics of a gas tank that came in for cleaning & repair due to rotten & varnished gas inside the tank. We eneded up having to cut the tank apart because the fuel [...]
Caterpillar 793C Folded Core and 793F Mesabi Radiators Disassembled For Cleaning and Repair
Here’s some pics of a couple of Caterpillar haul truck radiators we're disassembling for cleaning & repair. The stack of sixty folded radiator cores are for a 793C haul truck. The other radiator is a [...]
Cast Iron Diesel Exhaust Manifold Surface Machining or Surfacing
Here's some before & after pics of a cast iron diesel exhaust manifold that came in for surfacing. The flanges were not sitting at the same plane to each other which was causing excessive exhaust [...]
Epiroc Pit Viper PV 271 Mining Exploration Drill Rig Radiator and Oil Cooler Repairing and Rebuilding
Here’s some pics of an aluminum radiator & oil cooler that we had come in for repairing & rebuilding. They are both off of an Atlas Copco, or Epiroc, PV271 (Pit Viper) drill rig. We [...]
Hitachi EX5600 Mining Shovel Radiator Rebuilding With New Heavy Duty High Efficiency Cores Recoring
Here’s some pics of a Hitachi EX5600 shovel radiator that needed some recoring. All eight cores were in pretty bad shape so we recored both the high temp radiator as well as the low temp [...]
Caterpillar Grader Axle Spindle Housing Repair With Bore Welding and Machining
Here’s some pics of a spindle housing we have setup with our automatic bore welder. When we repair & recondition a grader axle each part gets completely repaired & reconditioned back to OE specs. Most [...]
Caterpillar D10 Dozer Fusion Hardnose Cooling System Package Repair and Rebuilding
Here’s some pics of a Caterpillar D10 Dozer Fusion hardnose cooling package we picked up for repairing & rebuilding. The radiator, oil coolers, aftercoolers & other heat exchanger components are all aluminum units. We'll post [...]
Caterpillar 793C Rear Axle Diff Housing A-Frame Support Hitch Pin Yoke Repair
Here’s some pics of an a-frame that we replaced the yoke in. The a-frame is the rear axle diff housing support for a Caterpillar 793C haul truck. The bore is where the hitch pin goes [...]
Caterpillar D10T Fusion Dozer, Newell Coach and Autocar Garbage Truck Crankhole Radiator Repair and Rebuilding
Here’s some pics of some radiator projects going on in the radiator shop. The first four pics are of a bolt-on radiator off of a garbage truck. The hole in the core is for the [...]