Skip to content
Caterpillar 16M and 18M Grader Axle Rebuilding, Machining, Welding and Overhaul Repair
Here's some progress pics of a Caterpillar 16M Grader Axle we're rebuilding. There are some pictures during disassembly of the axle assembly along with some setup for machining pics. The spindle housing & lean arm [...]
PHE Plate Frame Heat Exchanger Picked Up For Cleaning, Repairing and Rebuilding Service
Here’s some pics of a PHE, Plate Heat Exchanger, we picked up for servicing. This plate frame Heat Exchanger has two hundred & forty six plates. Each plate will be removed for cleaning & inspection. [...]
Caterpillar Grader Axle Lean Arm Blasting, Magnafluxing, Welding, Boring and Machining
Here’s some pics of a lean arm we have in for repair. The lean arm goes on each end of a grader front axle. This one is for an 18M Caterpillar grader. We first thermal [...]
Garbage Truck Bolt-On Crankhole Radiator Repairing and Rebuilding For Republic Services, Burrtec and Waste Management Autocar Refuse Trucks
Here’s some pics of a crankhole bolt-on radiator we did a repair & rebuild to, or what we call, a rod & repair. This radiator has a crankhole, or crank box in it for a [...]
Caterpillar D10 Power Edge Modern Hex Bulldozer Hardnose Cooling Package Remanufacturing
Here’s some pics of Caterpillar D10 bulldozer hardnose cooling package we reconditioned. This cooling package is off of a newer Cat machine which can be recognized by the new style logo which represents the power [...]
Gas Tank With Rotten Varnished Gas Cleaning, Repairing and Renewing
Here’s some pics of a gas tank that came in for cleaning & repair due to rotten & varnished gas inside the tank. We eneded up having to cut the tank apart because the fuel [...]
Caterpillar 793C Folded Core and 793F Mesabi Radiators Disassembled For Cleaning and Repair
Here’s some pics of a couple of Caterpillar haul truck radiators we're disassembling for cleaning & repair. The stack of sixty folded radiator cores are for a 793C haul truck. The other radiator is a [...]
Cast Iron Diesel Exhaust Manifold Surface Machining or Surfacing
Here's some before & after pics of a cast iron diesel exhaust manifold that came in for surfacing. The flanges were not sitting at the same plane to each other which was causing excessive exhaust [...]
Epiroc Pit Viper PV 271 Mining Exploration Drill Rig Radiator and Oil Cooler Repairing and Rebuilding
Here’s some pics of an aluminum radiator & oil cooler that we had come in for repairing & rebuilding. They are both off of an Atlas Copco, or Epiroc, PV271 (Pit Viper) drill rig. We [...]
Hitachi EX5600 Mining Shovel Radiator Rebuilding With New Heavy Duty High Efficiency Cores Recoring
Here’s some pics of a Hitachi EX5600 shovel radiator that needed some recoring. All eight cores were in pretty bad shape so we recored both the high temp radiator as well as the low temp [...]
Caterpillar Grader Axle Spindle Housing Repair With Bore Welding and Machining
Here’s some pics of a spindle housing we have setup with our automatic bore welder. When we repair & recondition a grader axle each part gets completely repaired & reconditioned back to OE specs. Most [...]
Caterpillar D10 Dozer Fusion Hardnose Cooling System Package Repair and Rebuilding
Here’s some pics of a Caterpillar D10 Dozer Fusion hardnose cooling package we picked up for repairing & rebuilding. The radiator, oil coolers, aftercoolers & other heat exchanger components are all aluminum units. We'll post [...]