Skip to content
Caterpillar 793D Mesabi Radiator, Hitachi EX5500 Shovel Radiator and 793C Haul Truck Rear Axle A-Frame Assemblies Pick Up
Here’s a load of Caterpillar & Hitachi radiators & parts we picked up for repair & rebuild. On the back of the trailer is a Caterpillar 793D haul truck radiator. In the middle of the [...]
Cat 16M Grader Axle Welding, Repairing and Rebuilding
Here's some pics of the spindle housing for a Caterpillar 16M grader axle we're rebuilding. The machined areas of the housing were worn & damaged. We welded the worn areas up & then surfaced & [...]
Caterpillar D10 Dozer AMOCS Modular Radiator Section Cores Cleaning and Rebuilding
This is a load of Caterpillar AMOCS modular radiator cores for a D10 dozer. These cores came in so dirty you couldn't even see the fins on most of them. We got them all cleaned [...]
Cummins Diesel Engine Camshaft Cleaning and Polishing
This is a Cummins camshaft that we cleaned & inspected before micro polishing the journals & lobes. Most diesel engines utilize roller followers, or lifters, so the camshaft isn't normally replaced during a rebuild if [...]
Caterpillar D11T Dozer Mesabi Copper Tube Radiator Cleaning and Rebuilding
This is a Caterpillar D11T dozer radiator we're rebuilding. It is a Mesabi radiator with copper V Style Tubes. We have removed all the tubes & rubber grommet seals from the tanks & frame assembly. [...]
Caterpillar 793C Haul Truck Radiator and D10T Dozer 213-9906 Radiator Cores or Sections
Here's a pick-up we made from some of the mines. The radiator is for a Caterpillar 793C haul truck. On the back of the trailer is some Caterpillar 213-9906 D10T Dozer Radiator cores, or sections, [...]
Caterpillar 16M Grader Circle Drawbar Welding, Machining and Fabrication
This is a grader circle drawbar we are fabricating & building from scratch. This drawbar will be fitted to a Caterpillar 16M grader circle assembly. The plate was cut to shape with all the necessary [...]
Antique Vintage Copper Brass Radiator Rebuilding Recore
This is an older copper brass radiator we restored with a new core. The original core had a bucket header but those are hard to get these days. To keep the top tank & bucket [...]
Green Diamond International Inline Six Cylinder Engine Block Line Boring
This is a Green Diamond 233 cubic inch inline six cylinder engine block out of a 1949 International KB-5 truck. The four housing bores are all a different size so line boring is necessary in [...]
Caterpillar 793F Haul Truck Mesabi Radiator Rebuild Assembly
This is a Caterpillar 793F haul truck Mesabi radiator. Each of the individual Mesabi tubes have been removed for cleaning, ultrasonic boiling, buffing & polishing. All the bores in the lower, center & upper tanks [...]
Caterpillar 993K Loader Shell and Tube Oil Cooler Heat Exchanger Cleaning and Repairing
This is a shell-&-tube heat exchanger that came in for cleaning, repairing & pressure testing. This heat exchanger is an oil cooler for a Caterpillar 993K loader. The tubes were plugged internally with debris & [...]
855 Cummins Big Cam III Diesel Engine Block Machining, Line Boring, Deck Surfacing & Counterbores Boring
This is an 855 Cummins Big Cam diesel engine block. The housing bore was damaged so it needed a line bore. The upper counterbores were machined to the proper depths after the deck was surfaced [...]