Skip to content
6.6 Liter Duramax Diesel Engine Block Line Boring With Wagler Billet Main Caps On Rottler EM105H CNC Machine
This is a 2007 Chevy 6.6 liter Duramax LBZ diesel engine block getting the housing bore line bored on our Rottler EM105H CNC machine. The block is fitted with a set of Wagler billet main [...]
Dirty, Plugged, Clogged, Damaged and Leaking Radiators for Repairing
Here's some smaller passenger car & truck size radiators we have in for rod & repair & more than likely some recoring. These radiators are damaged, dirty & internally plugged & clogged down in the [...]
Caterpillar 789B Haul Truck Folded Core Radiator Rebuild
This is a Caterpillar 789B haul truck folded core radiator we did a complete overhaul to. We delivered it back to our customer along with a Ford F750 air suspension drivers seat that we repaired [...]
Chevy GM Isuzu Duramax Diesel Crankshaft Crack Failure
This is a 6.6 liter Duramax diesel V8 steel crankshaft. The engine developed a knock that kept getting louder. After the engine was disassembled we found the number two main housing bore is a bit [...]
Caterpillar 793C Radiator Pressure Testing and Rebuilding
Here's a Caterpillar 793C mining haul truck folded core radiator. In the one pic it is in our test tank getting pressure tested. After the pressure test is completed the radiator gets a final cleaning, [...]
Caterpillar Rubber Tire Dozer Trunnion Support Welding and CNC Machining Repair
This is a Caterpillar trunnion support for an 854G RTD (Rubber Tire Dozer). The mounting pads of the trunnion support were worn & damaged which required welding the worn areas up. Here the trunnion support [...]
Caterpillar 777 Mining Water Truck Folded Core Radiator Exchange
This is a Caterpillar 777 folded core radiator we rebuilt & exchanged with our customer. This radiator is for a water truck which is used to water the haul roads at the mine which keeps [...]
1998 Chevy 350 Small Block V8 Engine Machining
This is a 1998 Chevy 350 small block engine we did all the machine work to. After the block, cylinder heads & connecting rods were thermal cleaned & blasted they were all magnafluxed for cracks. [...]
Caterpillar 854K Rubber Tire Dozer RTD Air To Air Aftercooler Recore
This is a CAC charge air cooler that came in off of a Caterpillar 854K RTD Rubber Tire Dozer. The inlet header was cracked so we ordered a new heavy duty core for it. We [...]
Small Journal Chevy 327 Camaro Engine
This is a small journal 327 Chevy engine we're rebuilding for a 1967 Camaro. The engine is outfitted with a custom ground hydraulic roller camshaft, roller lifters & full roller rockers from Comp Cams. The [...]
Caterpillar 16G Mining Grader Folded Core Radiator and AC Condenser Repair and Return
This is a Caterpillar 16G Grader folded core radiator & AC condenser. Both the radiator & condenser were leaking & extremely dirty externally. We ultrasonic cleaned the condenser & all the folded cores of the [...]
Honda 250R Cylinder Jug Boring and Honing For Oversize Wiseco Forged Piston
This is a Honda 250R cylinder jug that came in for boring & honing. We mounted the cylinder in our Rottler boring bar & bored it for the new oversize Wiseco forged piston. We then [...]