Skip to content
Position Available For A Radiator Man Benchman, Torch Soldering Technician
Motor Mission is looking for an experienced radiator man benchman that can run solder with a torch. If you are interested in working in a clean radiator shop located in Las Vegas, Nv. we have [...]
Caterpillar 793C Mining Haul Truck Folded Core Radiator and Hitachi EX5500 Mining Shovel Radiator Picked Up For Repair, Rebuild and Return
Here’s a couple radiators we picked up for repairing & rebuilding. The yellow radiator is off of a Caterpillar 793C haul truck & the orange radiator is off of a Hitachi EX5500 shovel. Motor Mission [...]
Caterpillar Dozer 213-9906 and 204-7184 Radiator Core Sections Rod and Repair Delivery
Here's a delivery of some Caterpillar mining equipment parts we delivered back to one of our mine customers. The radiator cores, or sections, are #213-9906 for ten & #204-7184 for two & they are for [...]
International 515 Dresser Loader Bores Welding and Machining Rebuild For New Pins and Bushings
This is an older International 515 Dresser Loader that we are repairing the bores on. We will be separating the front & rear sections so we can bore, weld & then re-bore the center articulating [...]
Caterpillar 6060FS Mining Shovel Radiator, Intercooler, Aftercooler and Charge Air Cooler Stack Assembly
Here's a Caterpillar 6060FS mining shovel cooling package we're finishing up & putting together. We offer this all aluminum radiator & intercooler (aftercooler, charge air cooler CAC) package completely assembled & ready to drop in [...]
Caterpillar 777 Mining Haul Truck Radiator Repairing, Overhauling and Rebuilding
This is a Caterpillar 777 haul truck radiator we're rebuilding. All the individual Cat folded radiator cores have received a rod & repair along with each one being pressure tested before being installed into the [...]
Caterpillar 16G Grader Blade Circle Replacement Drawbar Welding and Fabrication
Here's some more pics of the Cat 16G grader circle drawbar were fabricating. There's a lot of welding to be done at this point so it's going a little slow right now. We'll post pics [...]
Caterpillar MD6240 Rotary Drill Rig and 6060FS Shovel Radiator and Aftercooler Repair and Rebuild
Here's some Caterpillar mining equipment parts we picked up from one of our mining customers for repair & rebuild. On our stand is a 6060FS Shovel Radiator & Intercooler, or Aftercooler, assembly. The smaller gearbox [...]
Caterpillar Loader Trunnion Support Repair and Machining Rebuild On Rottler Multipurpose CNC Machine
This is a Caterpillar loader trunnion support we are repairing. The trunnion support is mounted on our Rottler CNC machine getting trued & squared so we can machine the mounting surfaces flat & parallel to [...]
Caterpillar 6060FS Hydraulic Open Pit Mining Shovel Radiator and Intercooler Stack Assembly and 854K RTD Aftercooler
This is a Caterpillar 6060FS hydraulic shovel radiator & intercooler stack assembly we delivered to one of our mining customers. Both the radiator & the intercooler are all aluminum. We cut the tanks off the [...]
Caterpillar 280-0111 854K Aluminum Aftercooler Repairing and Recoring
This is an aftercooler for a Caterpillar 854K wheel dozer that came in leaking due to a large crack in the header. We cut the tanks off the core & machined them to size on [...]
Custom and Specialty Machining Of An Alternator V-Belt Pulley
This is a custom pulley we machined to fit between two Ford OEM pulley pieces. Our customers alternator has a two groove pulley but his original pulley setup on the engine only had one groove. [...]