Skip to content
Gallion Komatsu Grader Radiator Damaged From The Fan Coming Apart Repair and Rebuild
Here are some before & after pics of a smaller bolt-on radiator that we rebuilt for one of our fleet customers. The radiator came in with some leaking damage in the core from the fan [...]
Komatsu 830E Nosecone Pivot Eye Bore Machining For Oversize Bearing Carrier Repair
Here’s some before & after pics of a Komatsu 830E haul truck Pivot Eye, or Nosecone, we had in for machining. The bore that houses the spherical bearing was worn & out-of-round. We machined the [...]
Caterpillar D10T2 Modine CGT Copper Grommeted Tube Radiator Damaged From Fan Debris Sandblasting Repairing and Rebuilding
Here are some before & after pics of a Caterpillar D10T2 radiator we rebuilt. The radiator is a Modine CGT (Copper Grommeted Tube) type radiator that has individual copper tubes. A good majority of the [...]
Caterpillar 16H Grader Machinery In For Circle, Drawbar, Table, Blade Carrier, Moldboard and Blade Repair & Rebuilding
Here’s some pics of a Caterpillar 16H Grader we had come in for a complete rebuilding to the circle, drawbar, or table, blade hanger carrier & moldboard, or blade. We removed the complete circle & [...]
Caterpillar 988 Loader Radiator Recore Rebuilding and Repairing
Here are some before & after pics of a bolt-on, or bolt together, radiator that came in for repairing & rebuilding. The radiator is off of a Caterpillar 988 loader. This is a conventional type [...]
Caterpillar D10T2 Dozer Hardnose Nosecone Cooling System With MESABI Radiator Repair and Rebuild
Here’s some before & after pics of a hardnose cooling system we rebuilt for a Caterpillar D10T2 dozer. This one had some damage to the grill gates as well as substantial external fouling of dirt, [...]
Caterpillar 994H Dogbone Link Machining, Welding, Boring, Surfacing & Milling Rebuild Repair
Here’s some pics of a Caterpillar 994H dogbone link that we repaired. The bores on both ends of the dogbone had to be machined, or bored, oversize. We then welded the bores with our automatic [...]
Komatsu 930E-5 MESABI Aluminum Tube Radiator Assembly Repairing and Rebuilding
Here’s some pics of a Komatsu 930E-5 MESABI Radiator we rebuilt. Both the LTC (low temp circuit) & HTC (high temp circuit) radiator halves are comprised of all aluminum tubes, or cores. Though we don't [...]
Caterpillar 18M Grader Circle, Drawbar, Circle Drive Motor and Blade Hanger Machining, Repairing and Rebuilding
Here’s some pics of an 18M Caterpillar Grader Circle, Drawbar & Blade Hanger with the Circle Drive Motor that we overhauled. The circle itself was machined to spec on it's top & inner ID surfaces [...]
Epiroc Pit Viper 291 Drill Rig Aluminum Bar and Plate Radiator Failure Hot Shot Hotshot Repair
Here’s some before & after pics of a hotshot radiator repair we did. The radiator is all aluminum with a bar-and-plate core & extruded tanks. The radiator was leaking in the middle of the core [...]
Caterpillar D10T Dozer Hardnose Nosecone With MESABI Radiator Cooling System Components Rebuilding
Here are some before & after pics of a Caterpillar D10T dozer hardnose, or nosecone we rebuilt. Inside the hadnose are a MESABI radiator, two aluminum aftercoolers, fan blade, hydraulic fan motor, electrical harness, oil [...]
John Deere 744E Diesel Engine Connecting Rods Reconditioning With Tapered Wrist Pin Bushings
Here's some before & after pics of a set of inline six cylinder John Deere 744E diesel engine connecting rods. The big ends of the rods were out-of-round & required resizing, or reconditioning. The small [...]