Skip to content
Here's a load of Caterpillar 793C haul truck parts we picked up. There's a radiator, brake coolers, hydraulic oil cooler & a steering bellcrank or Y-Link. These parts will be added to our stock of rebuilt inventory for service exchange as needed by our customers. First off will be getting it all cleaned up, repaired, [...]
This is a lean arm for the front axle of a grader. The bores as well as the surfaces where the lean arm pivots get extremely worn & damaged. After cleaning & blasting the lean arm we check them for cracks. If they pass inspection for re-use the bores & surfaces are machined, then welded [...]
This is a 16G Caterpillar grader circle & drawbar assembly with the blade & circle drive motor. We completely repaired & overhauled the circle drive motor, the blade & the circle which needed some new segments welded in place. The drawbar is a complete new assembly that we built in-house with a thicker main plate [...]
This is a hardnose, or nosecone, assembly that we're in the process of going back together with. This one is off of a Caterpillar D10T2 dozer. Inside this hardnose are two aluminum radiators, two aluminum aftercoolers, an aluminum oil cooler & an aluminum AC condenser. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las [...]
This is a Gardner Denver blower that we delivered to one of our customers. It is used as a lime blower & it ingested some debris causing major damage & wear to the inside of the housing & the rotors. A complete rebuild with a new housing & rotors is what it took to get [...]
Here's a load of parts we repaired & rebuilt for one or our mining customers. On the front of our trailer is a Caterpillar 793C haul truck radiator. On the back of the trailer is a Caterpillar 16G grader axle assembly that we did a complete repair, machining & overhaul to. And stuffed in the [...]
This is a transmission out of a Gehl telehandler. The transmission came in for repair because the machine would not move when it was put into gear. Some of the parts have been a challenge to get. We went ahead & made some of the parts while some of them are still due in. Once [...]
This is a fuel tank we picked up from one of our mining customers for cleaning & repairing. The tank is off of a Komatsu 830E DC haul truck. The tank will get drained & flushed internally before getting completely blasted externally. After that the cutting, grinding & welding will commence. Motor Mission Machine & [...]
Here’s some pics of a Caterpillar dozer equalizer bar we rebuilt. All three bores were machined, welded & re-machined back to the proper specs. We then pressed brand new bushings & bearings in place. Then there's some pics of some flanged sleeves we machined with tapered bores on the ID for a ballstud application. Motor [...]
Here's a couple of Caterpillar mining equipment parts we picked up for repairing & rebuilding. The radiator is a folded core 789B haul truck cooling unit. The axle is off of a 16G grader that needs all its surfaces & bores machined, welded & then machined again back to Caterpillar specs. Motor Mission Machine & [...]
