Skip to content
This is a Cat 773 truck radiator & a 793C fuel tank we delivered along with a Ford truck bench seat. We did a complete rod & repair overhaul to the 773 radiator while the 793 fuel tank got a complete rebuild along with repairs to the internal baffles. The Ford truck bench seat needed [...]
Here's some parts of a Caterpillar grader circle assembly & front axle that we're rebuilding. All the bores & machined surfaces are getting welded up and bored or milled back to specs. Some of the parts are red from the dye check process to check for any cracks & defects while others are painted & [...]
This is a complete hardnose assembly off a Cat 854K rubber tire dozer, RTD. The hardnose contains the radiator, aftercoolers, hydraulic oil cooler, engine oil cooler, and AC condenser all of which we reconditioned and rebuilt. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 [...]
Here's a couple of Cat fuel tanks we picked up for rebuilding. The small tank is for a Cat 740 articulating dump truck & the larger one is for a Cat 793 haul truck. Both tanks are cracked & leaking so we will be repairing the damaged baffles inside and then straightening any dented areas [...]
Here's a load of Cat grader parts we picked up for repair and rebuilding. On the front of the trailer are front axles for a 16G & a 16M. In the boxes is a 16M radiator, oil cooler, & aftercooler. And on the back of the trailer is a draw bar and circle assembly. For [...]
Here's a couple of Mega RM80 water cannons we repaired and completely rebuilt. Both cannons were worn and corroded at the flanges which allowed too much water to leak past the seals. So we machined new flanges, cut the original flanges off the cannons, and welded the ones we machined in place. We then assembled [...]
This is the oil cooler and aftercooler off of a Cat MD6240 drill rig. Both coolers are Mesabi style units with aluminum tubes. The tubes in the aftercooler were eroded completely through from the outside so it had a major turbo pressure leak. We picked-up, rebuilt both coolers with all new rubber seals and tubes [...]
On the road with another delivery of parts we repaired and rebuilt for some of our mining customers. On the front of the trailer is a Caterpillar 793F Mesabi style radiator with the aftercoolers bolted up to it. In the wooden crates are a couple of Caterpillar 854K oil coolers and on the back are [...]
Here's some pics of a pick-up we made to one of the mines in Northern Nevada. Both the radiator and the fuel tank are for a Caterpillar 793D haul truck. The radiator was changed out with the engine so it has served a 2 year life and is ready for a complete repair and overhaul. [...]
Here's some pics of some Caterpillar 235-8668, 316-9360, 187-2017, 205-8347, 6W6368, and 113-5115 loader trunnion supports that we have in for repair. Some of the bores on these trunnions are sixteen inches in diameter that need to be bored and repaired. The smallest trunnion weighs right at four hundred pounds while the biggest one weighs [...]
