Industrial & Heavy Equipment

Here's some pics of some radiators, oil coolers, aftercoolers, and fuel tanks that we've overhauled, rebuilt, and reconditioned. This is in the yard of one of our mine customers. The tall orange radiator is for an Atlas Copco Pit Viper drill rig which we recored with our Rocore mechanically bonded radiator cores. The shorter orange [...]

Many times while we're on the road picking up and delivering radiators, fuel tanks, and other parts to the mines we have to pull over off the highway to make way for mining equipment that is being transported from one mine to another mine. Here are some pics we've taken of some of those [...]

Here's a load of work we picked up from the mines for repair & rebuilding. On our trailer is a Caterpillar 16G grader axle that needs to be rebuilt. We will weld up the bores and bore them back to the proper size with our portable line bore and reassemble it with all [...]

This is a bolt-on radiator out of an 8460 American crane. This radiator cools the lower engine of the crane. The original core was in pretty bad shape so it was decided to recore the radiator with a heavy duty copper and brass high efficiency core. The tanks and side brackets were thermal [...]

This is a small heat exchanger off of a Kenworth T800B blasting truck for one of our mining customers. The original heat exchanger was an all steel unit which was leaking in the core in several areas. So we built a complete replacement out of aluminum. Motor Mission Machine & Radiator 5435 Desert [...]

Here's some pics of some Caterpillar 793F haul trucks. These trucks were on lease to one of the mines but now they're just sitting since the lease ran out. The radiator sits behind the black grill on the front of the trucks. Looking at the whole truck doesn't make the radiators look so [...]

Here's some pics of a Caterpillar 3500 series diesel engine. This engine is a 3516 which came out of a 793 haul truck. The 3516 means it is a V16 cylinder engine. That's eight big cylinders down each side of the engine. This engine was just removed from the dump truck and replaced [...]

This is a Caterpillar 16G grader axle that we did a complete overhaul & rebuild to. We had to weld all the bores and then bore them to the correct size with our portable line bore for the new pins. We had to use a lot of heat & pressure in the press [...]

This is a load we picked up from one of the mines. The large radiator with the big fan shroud on it is a Mesabi-style radiator for a Komatsu 830E haul truck and the fuel tank is for the same application. The fuel tank is blowed up like a balloon so we'll have [...]