Radiator Shop

This is a Caterpillar 993K loader hardnose cooling package that came in for a complete overhaul. Inside the hardnose there are eighteen aluminum AMOCS modular radiator cores, two hydraulic oil coolers & two aftercoolers. The fan & hydraulic fan motor are part of the package as well. Motor Mission Machine & Radiator 5435 Desert Point [...]

Here's some progress pics of the tanks & sideframes of a Mesabi radiator & oil cooler assembly. This radiator & oil cooler is for a Komatsu WA1200 loader that's used in an open pit mine. The next step is to clean all the bores & check them with the go-no-go gauge for size. Then all [...]

Here's a load of Caterpillar mining equipment radiators we picked up for repair & return. The radiator on the stand is a 793C haul truck radiator. The two radiators laying down are for a 6060FS shovel excavator. We'll get them cleaned up, repaired, pressure tested & ready for another round of service. Motor Mission Machine [...]

Here’s a couple of Caterpillar #393-5047 radiators we delivered on our exchange program. These radiators are for a D10T2 dozer. Both radiators are constructed with aluminum bar-and-plate cores with cast aluminum tanks. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com [...]

Here’s a load of Caterpillar AMOCS (Advanced Modular Cooling System) modular radiator cores we did a repair & return to our customer. These radiator cores are for a D10T dozer. There are twelve total cores. Ten of them are 204-7184 & two of them are 213-9906. We got them all cleaned internally & externally as [...]

Here’s a Caterpillar 793C haul truck radiator we rebuilt & delivered back to our customers mine site. We couldn't get any Caterpillar Yellow paint within our time frame so we had to have some made from another supplier but it was off a bit. So we're calling this Radiator the Pumpkin Spice 793. Motor Mission [...]

Here's a Caterpillar 793F haul truck radiator we rebuilt & delivered back to one of our mining customers. This radiator is a Mesabi which is comprised of just under a thousand individual copper finned tubes. Each tube was removed for reconditioning. All the upper & lower rubber grommet seals were removed & new ones installed [...]

Here's an aluminum drill rig radiator in our test tank getting pressure tested. This radiator is off of an Atlas Copco Pit Viper 271 which now goes under the Epiroc line. The core of this radiator is a bar-and-plate design with extruded inlet & outlet tanks. Motor Mission Machine & Radiator 5435 Desert Point Dr. [...]