This is a Caterpillar 16M grader axle that we did a complete rebuild and repair to. We completely disassembled the axle assembly and blasted it down to raw metal so we could check all the parts for cracks. We then welded all the worn out bores to make them smaller with our portable bore welder. After all the bores were welded up we then mounted our portable line bore to the parts and bored the bores back out to their proper sizes for new pins. Once all the bores were back to spec we installed all the new seals, bearings, and bushings before final assembly.
Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission