Skip to content
This is a bolt together radiator that we rebuilt for a drill rig. The radiator came in leaking in the headers. We disassembled the radiator, did a rod & repair, ultrasonic boiled & re-ran the headers on both cores. The tanks got thermal cleaned, blasted, primed & painted. After final assembly we pressure tested the [...]
Here's some parts of a large mining equipment radiator we're in the process of rebuilding. The tanks & brackets have been cleaned, blasted, repaired & painted. The radiator cores have been rodded, repaired, ultrasonic boiled, & the headers have been run. Assembly is next. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, [...]
This is a Chevy small block engine block that came in for machine work. The engine sat with water in the cylinders long enough for rust & pitting damage to take place. The block is in our Sunnen CK10 cylinder hone getting it's cylinders rough honed to see what size they will clean up at. [...]
This is a Caterpillar mining haul truck radiator. We did a complete rod & repair rebuild to it before pressure testing it in our test tank. Next it'll go on the stand for delivery. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) [...]
This is a set of 304 cubic inch AMC V8 cylinder heads that came in for rebuilding. They are off of a 1980 Jeep Wrangler. One of the exhaust valves was cracked from being burnt. We did a complete rebuild including magnafluxing for cracks, pressure testing for leaks & a three angle valve job & [...]
This is a Hitachi EX5600 mining shovel radiator in our test tank being pressure tested. We did a complete recore overhaul to both the high temp & low temp radiator circuits with new heavy duty high efficiency copper & brass radiator cores. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 [...]
This is an aluminum Yamaha cylinder head with five valves in the cylinder or combustion chamber. We removed the old valve guides, installed some new valve guides & reemed them to size for the valve stems of the new valves. We then performed a three angle valve job & surface. Motor Mission Machine & Radiator [...]
Here's a couple of Hitachi EX5500 hydraulic oil coolers we did in aluminum to replace the original steel units. Along with the oil coolers we delivered a Komatsu 830E haul truck Mesabi radiator that we did a complete overhaul to. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) [...]
Here's some random pics of parts we're machining in the machine shop. The vintage Suzuki motorcycle engine got cleaned & surfaced on the decks of the cylinder head as well as the cylinder block. The cylinders also got a bore & hone to some new Wiseco forged pistons. The cylinder head being surfaced is a [...]
This is a complete hardnose assembly off of a Cat D11T-2 dozer. The radiator is a Mesabi style which we completely rebuilt. The entire hardnose was disassembled, cleaned, inspected & repaired as necessary before final prepping & painting. All hydraulic hoses were replaced along with all the other miscellaneous hardware. The aftercoolers were replaced along [...]
