Skip to content
This is a Caterpillar mining haul truck radiator. We did a complete rod & repair rebuild to it before pressure testing it in our test tank. Next it'll go on the stand for delivery. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) [...]
This is a set of 304 cubic inch AMC V8 cylinder heads that came in for rebuilding. They are off of a 1980 Jeep Wrangler. One of the exhaust valves was cracked from being burnt. We did a complete rebuild including magnafluxing for cracks, pressure testing for leaks & a three angle valve job & [...]
This is a Hitachi EX5600 mining shovel radiator in our test tank being pressure tested. We did a complete recore overhaul to both the high temp & low temp radiator circuits with new heavy duty high efficiency copper & brass radiator cores. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 [...]
This is an aluminum Yamaha cylinder head with five valves in the cylinder or combustion chamber. We removed the old valve guides, installed some new valve guides & reemed them to size for the valve stems of the new valves. We then performed a three angle valve job & surface. Motor Mission Machine & Radiator [...]
Here's a couple of Hitachi EX5500 hydraulic oil coolers we did in aluminum to replace the original steel units. Along with the oil coolers we delivered a Komatsu 830E haul truck Mesabi radiator that we did a complete overhaul to. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) [...]
Here's some random pics of parts we're machining in the machine shop. The vintage Suzuki motorcycle engine got cleaned & surfaced on the decks of the cylinder head as well as the cylinder block. The cylinders also got a bore & hone to some new Wiseco forged pistons. The cylinder head being surfaced is a [...]
This is a complete hardnose assembly off of a Cat D11T-2 dozer. The radiator is a Mesabi style which we completely rebuilt. The entire hardnose was disassembled, cleaned, inspected & repaired as necessary before final prepping & painting. All hydraulic hoses were replaced along with all the other miscellaneous hardware. The aftercoolers were replaced along [...]
This is a set of Chevy GM aluminum LS cylinder heads. We did a complete valve job & surface to both heads. The heads were disassembled, cleaned & inspected before getting the valve seats machined & the decks surfaced & milled flat & square. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, [...]
It's semi truck radiators & Cat folded radiator cores repair & rebuilding. The radiator cores are all bolt-on radiator cores ready for the overhaul process. The tanks & side brackets are lined up & in order for cleaning & painting along with a load of Caterpillar folded radiator cores. Motor Mission Machine & Radiator 5435 [...]
This is a Hercules model JXLD gas flathead engine we're machining. We're doing a complete engine restoration rebuild on this antique engine. It is out of a 1945 Lorain Model TL20 crane that is getting a full rebuild & restoration. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) [...]
