Skip to content
Here's some before and after pics of a Caterpillar 793C mining haul truck folded core style radiator. Three of the pics show the radiator all dirty and used up when we picked it up for repair and rebuilding. The other three pics show it all cleaned up and ready for another service life after we [...]
Here's some pics of some motorcycle and ATV cylinder jugs that came in for a bore and hone. The smaller one is a two stroke cylinder that is getting machined for a new Wiseco forged piston. The larger cylinder is a four stroke Yamaha Rhino and it is getting a bore and hone for a [...]
Here's some pics of a delivery we made to one of the mines on our Isuzu NPR flatbed truck. The radiator is off of a Caterpillar 793C haul truck and the axle assembly is for a 16G grader. We did a complete rebuild and overhaul to both of them with full repairs. Motor Mission Machine [...]
Here's some pics of a high performance forged piston for a Suzuki Hayabusa engine. The engine is getting 1 mm larger intake valves. During the mock up and checking for piston-to-valve clearance the edges of the intake valves were contacting the edges of the intake valve releifs on the tops of the pistons. Here we [...]
Here's some before and after pics of a 1932 Chevy Chevrolet water pump that came in for rebuilding. We completely disassembled the water pump, machined the housing as necessary along with the shaft, and assembled it with new bearings and seals. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: [...]
Here's some pics of a mine delivery of radiators and a fuel tank we repaired and rebuilt. The fuel tank and large radiator are for a Caterpillar 793C haul truck. The small folded core radiator on the left rear of the trailer is for a Caterpillar 16G grader. And the radiator on the right rear [...]
Here's a custom piece we did some machining and fabricating to. The aluminum base plate was brought to us so we could countersink the bolt holes for the panhead allen head bolts. We then cut, fabricated, tig welded, and machined the velocity stacks which are four inches long. We also had to fab and machine the [...]
Got Plastic? Yes, we repair plastic and aluminum radiators too. We also sell brand new complete radiators for all makes and models. We also offer custom radiator manufacturing and building for any and all applications. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 Fax: [...]
Here's some pics of some high performance big inch big block Chevy engines we're building. One is a 505 cubic inch and the other one is 555 cid. The 505 is based on a 454 block and the 555 is based on a 502 block. They are both getting a quarter inch stroke Howards Cams [...]
Here's some pics of a couple radiators we picked up from one of our mine customers for R&R or repair and return. The orange radiator is a low temp and high temp radiator assembly for a Hitachi EX5500 shovel. The small yellow radiator is a folded core style radiator for a Caterpillar grader. We'll get [...]
